Search results

Make sure you connected the fan to the CPU_FAN connector and not the CHA_FAN2 connector.

will this help? https://www.amazon.de/-/en/YIWENTEC-DisplayPort-7680X4320-Bi-Directional-Transmission/dp/B089QD7QHF/ref=sr_1_4?keywords=3m%2Bmini%2Bdisplayport%2Bauf%2Bdisplayport%2B1.4&sr=8-4&th=1

Are you uding s PC or Lsptop? What kind of hardware are you using? Motherboard make and model, or Laptop make and model, and the OS

Have you checked if the other end of the cable in wall is connected to a switch or router?

What motherboard are you using?

What model laptop do you have?

What motherboard, CPU, and RAM are you using?

See if this driver will work https://download.cnet.com/3Com-Megahertz-10-100-LAN-CardBus-PC-Card/3000-2112_4-149236.html

You could try this one to reduce the speed of the fans. not sure if it will effect the RGB speed https://www.newegg.com/en-labs-pcifanco8spr-metal-fan-speed-controller/p/376-0067-00009

Are you sure the motherboard supports the Celeron G3900? I don't see it in the supported CPU list for this motherboard.

Have you tried using DISKPART? Once you selected the right disk, try the CLEAN command which should delete all partitions on the drive

What OS are you using? There are only Windows XP/2000 drivers available on the DynaBook website. https://support.dynabook.com/support/modelHome?freeText=438069&osId=3333637 Windows Vista should have come with the driver.

What CPU and Mother board are you using? What video card are you using?

It seems that the router ports are only 10/100 BaseT https://www.asus.com/us/Networking-IoT-Servers/WiFi-Routers/ASUS-WiFi-Routers/RTAC51U/techspec/ RJ45 for 10/100 BaseT for WAN x 1, RJ45 for 10/100 BaseT for LAN x 4

If this is the cable you are referring to, then you monitor has build in USB3 ports. https://www.amazon.com/Cable-Matters-SuperSpeed-Type-Black/dp/B00C7RZPJ0 To enable the ports connect the flat one to you computer and the other to your monitor. It is not needed to if you don't want to use...

Please provide Make and Model of the MOBO

Have you tried a different USB port?

The connector type should be a Slim SATA https://www.newegg.com/p/N82E16812186155?

What is the make and model of the memory?

I would go for the i7

What motherboard do you have? Does your motherboard support support either of the CPUs?

Have you tried downloading the AHCI drive from the Lenovo website and load it at the screen where you expect to see the drive listed?

What is current BIOS version? If your motherboard has Version 3.00 or higher, it will support the Ryzen 5000. If your motherboard has version 2.80 or below, you can use a Pinnacle Ridge CPU by following the information in this PDF from their website...

The error message referrers to the system not being able to detect the drive.

https://www.gateway.com/gw/en/US/content/drivers-downloads

According to Crucial the laptop only supports 8GB (2x 4GB) total max https://www.crucial.com/compatible-upgrade-for/lenovo/thinkpad-l412

You could use one of these given that your PSU meets the GPU power requirements. https://www.newegg.com/en-labs-10cm-4-inch-pcie-6pin-to-8pin/p/1W7-005X-00005

the max length 330ft of the network cable is between two devices (Router being one); therefore, the max distance between you two computers can be more than 330ft as long as you have a switch or router in the middle. The router will act as you called it a refresh point. Since you only have a...

Used DELL XPS 8700 are listed on ebay for around $200

When replacing the power supply, you need to replace the wires, too. There is no telling what the pin-out on the wire are. The wires on modular PSUs can differ from model to model and manufacturer to manufacturer.

Some of the older IBM/Lenovo servers used a 10Pin, too. For those there is a converter from 24Pin to 10Pin. Not sure if this will work. https://www.amazon.com/Adapter-Braided-Sleeved-Motherboard-Servers/dp/B07D7WHCSN/ref=pd_sbs_147_5/142-7515327-5779947

Get a DP (DisplayPot) to HDMI adapter like this one https://www.newegg.com/black-ixever-25cm-9-8inch-displayport-cable/p/183-008U-00001

The printer according to the HP website is incompatible with Win10. However, there seems to be a way to get it to work. h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanjet-8250-driver-for-windows-10-64-bit/td-p/6811361

I f the new driver did not solve you problem, have you tried switching back to you previous drive via the Device Manager?

Are you touching the either the green or the red circle and swipe to the left or right? Just touching the the circle will not answer or hung up the phone.

Windows should automatically be reactivated As for the drivers, I would recommend downloading them, like WIFI, NC, Video, while you can still see which once are installed

How about a USB Sound Card? https://www.newegg.com/creative-sound-blaster-play-3/p/N82E16829102100?Description=usb%20sound%20card&cm_re=usb_sound_card-_-29-102-100-_-Product

Have you tried ESC or Fn+F2?

Does the internal speaker make any sound? Are you using the onboard video? Have you reset the BIOS?

Not sure if this will help https://drivers.softpedia.com/get/BIOS/Asrock/ASRock-B450M-HDV-R4-0-BIOS-1-40.shtml