What Do I Do to Fix KERNEL_DATA_INPAGE_ERROR In Windows 8?
KERNEL_DATA_INPAGE_ERROR is displayed on Blue Screen of Death (BSOD). This error has Bug Check Code (BCCode) 0x0000007A, and it means that there is some issue reading/loading information to/from Pagefile that is stored in the hard disk drive.
Exact cause of KERNEL_DATA_INPAGE_ERROR can be found by going through the code displayed under Parameter 2 heading which can be read by opening the generated minidump file in any .DMP viewer application such as BlueScreenView. Some most commonly Parameter 2 codes related to KERNEL_DATA_INPAGE_ERROR, STOP: 0x0000007A are:
[listNum]■0xC000009A – This Parameter 2 code represents missing nonpaged pool resources.
■0xC000009A – This code represents that the installed hard disk drive has bad sectors.
■0xC000009A – This code represents that the hard disk drive is not detected due to lose cabling, or any other similar reason.
[/listNum]
In order to rectify the error, CHKDSK command must be run under elevated privileges using appropriate parameters. In case the hard disk drive is not detected, the lose cables must be replaced or otherwise tightened in order to resolve the issue.
Another best practice to avoid the same problem in future is that paging file management must be configured to automatic. This ensures that Windows 8 automatically manages the size of the pagefile as needed.
How to Enable Legacy Advanced Boot Menu?
To enable legacy advanced boot menu in Windows 8, instructions given below must be followed:
How to Configure Automatic Paging File Management?
To configure Windows 8 to manage the pagefile automatically, instructions given below must be followed:
How to Run CHKDSK Command with Parameters?
In order to rectify KERNEL_DATA_INPAGE_ERROR, instructions given below must be followed:
KERNEL_DATA_INPAGE_ERROR is displayed on Blue Screen of Death (BSOD). This error has Bug Check Code (BCCode) 0x0000007A, and it means that there is some issue reading/loading information to/from Pagefile that is stored in the hard disk drive.
Exact cause of KERNEL_DATA_INPAGE_ERROR can be found by going through the code displayed under Parameter 2 heading which can be read by opening the generated minidump file in any .DMP viewer application such as BlueScreenView. Some most commonly Parameter 2 codes related to KERNEL_DATA_INPAGE_ERROR, STOP: 0x0000007A are:
[listNum]■0xC000009A – This Parameter 2 code represents missing nonpaged pool resources.
■0xC000009A – This code represents that the installed hard disk drive has bad sectors.
■0xC000009A – This code represents that the hard disk drive is not detected due to lose cabling, or any other similar reason.
[/listNum]
In order to rectify the error, CHKDSK command must be run under elevated privileges using appropriate parameters. In case the hard disk drive is not detected, the lose cables must be replaced or otherwise tightened in order to resolve the issue.
Another best practice to avoid the same problem in future is that paging file management must be configured to automatic. This ensures that Windows 8 automatically manages the size of the pagefile as needed.
How to Enable Legacy Advanced Boot Menu?
To enable legacy advanced boot menu in Windows 8, instructions given below must be followed:
- ■Restart the Windows 8 computer.
■Enter into the BIOS setup and configure the system to boot from CD/DVD Drive.
■Save the modified settings in BIOS and reboot the computer.
■Insert Microsoft Windows 8 bootable installation DVD into the optical media drive (CD/DVD Drive).
■When prompted to Press any key to boot from CD or DVD, press any key to boot the computer from DVD support.
■On the displayed Windows Setup box, click Next.
■On the next page, click Repair your computer.
■On Choose an option screen, click Troubleshoot.
■On Troubleshoot screen, click Advanced options.
■On Advanced options screen, click Command Prompt.
■On the opened command prompt window, type C: and hit Enter.
■On C: prompt, type BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY command, and press Enter to enable legacy advanced boot menu.
■Once the command executed successfully, type EXIT command to close the command prompt window.
■Back on the Choose an option screen, click Continue to restart Windows 8 computer.
■Eject Windows 8 installation DVD from the optical media drive when done.
How to Configure Automatic Paging File Management?
To configure Windows 8 to manage the pagefile automatically, instructions given below must be followed:
- ■As the computer restarts, press F8 key continuously to display the Advanced Boot Options screen.
■On Advanced Boot Options screen, select Safe Mode by pressing down arrow and press Enter to start Windows 8 computer in safe mode.
■Once started in safe mode, log on to Windows 8 computer with the administrator account.
■Click Desktop tile from the Start screen to go to the desktop window.
■On the desktop screen, click File Explorer icon from the taskbar.
■On the opened Libraries window, right-click Computer from the left pane.
■From the displayed context menu, click Properties.
■On the left pane of the System window, click Advanced system settings.
■On the System Properties box, make sure that Advanced tab is selected.
■On the selected tab, click Settings button under Performance section.
■On the Performance Options box, go to the Advanced tab.
■On the selected tab, under Virtual memory section, click Change.
■On the Virtual Memory box, make sure that Automatically manage paging file size for all drives checkbox is checked. If the checkbox is not checked, check the checkbox to allow the Windows to manage the pagefile automatically.
■Click OK to save the modified settings.
■On the System Properties box, click OK.
■Restart the computer to allow the modified settings to take effect.
How to Run CHKDSK Command with Parameters?
In order to rectify KERNEL_DATA_INPAGE_ERROR, instructions given below must be followed:
- ■Again press F8 key continuously while system restarts to display the Advanced Boot Options screen.
■On Advanced Boot Options screen, select Safe Mode by pressing down arrow and press Enter to start Windows 8 computer in safe mode.
■Once started in safe mode, log on to Windows 8 computer with the administrator account.
■Click Desktop tile from the Start screen to go to the desktop window.
■Once on the desktop screen, hover mouse to the bottom right corner of the window.
■From the displayed options, click Search.
■On the opened Search pane in the right, ensure that Apps category.
■On the same pane, type CMD in Apps field.
■From the displayed results on Apps window, right-click Command Prompt.
■From the displayed advanced options at the bottom of the window, click Run as administrator.
■On the displayed User Account Control box, click Yes to provide the administrator approval to open the command prompt.
■On command prompt window, type CHKDSK C: /F /R command and press Enter.
■On the displayed confirmation message, type Y to allow the Windows to check the disk the next time when the computer restarts.
■Close the command prompt window and restart the computer to start the disk checking process.
Facebook
Twitter
Instagram