Recent content by 4Ryan6

@4745454b Hey, Been a long time. I see you are a Moderator now, congratulations! Water cooling isn't for everyone that's for sure, but you are right, they have made it much simpler with the AIO coolers now. So how are you doing, well I Hope! Ry

For the record I still run chilled water cooling to this day. I did make some changes though, I originally thought I could run safely at 10c coolant temperature but 2 years ago I discovered I couldn't, because condensation actually built up over time underneath the water block edges. It was...

Your Graphics card under maximum full gaming load depending on the game settings used can pull 215w ~ 228w all by itself so IMO, your power supply is not adequate. After researching your power supply it only is capable of supporting a max load of 492w, you need more leeway than that. I...

You do not need 32G of system memory for gaming especially with the graphics card you have, plus the fact that it is a mismatched set to boot. The memory speeds may very well match but all of the timings do not, which forces the CPU to juggle down to what it can run, resulting in a loss of...

You may try pushing in the center of the fan blade toward the motor hub and listen for a slight click, it may very well not be fully seated on the spindle shaft.

Affirmative!

If you cannot get past your leak fears, you'll never water cool. Leaks will actually not occur if you setup properly, making sure all your fittings are snug and secure. Setting up properly is testing for leaks with just the water circulating for hours to be sure you have zero leaks before...

https://www.amazon.com/dp/B089KC3S5P/ref=redir_mobile_desktop?_encoding=UTF8&aaxitk=CVqvhkAqWKUHhfbSK39zVg&hsa_cr_id=4318038860401&pd_rd_plhdr=t&pd_rd_r=83ea0059-6319-4a59-afcd-3663f0f03ada&pd_rd_w=x27Ox&pd_rd_wg=VLJV7&ref_=sbx_be_s_sparkle_mcd_asin_2_title...

You can always get a splitter to run straight off of your power supply, if your power supply does not have any Molex connectors you can get a SATA power splitter.

Have you tried this fan on another known good port to see if it actually works?

Check in the M/B BIOS to see if the fan headers have an enable/disable feature if it is disabled then enable it. Also sometimes the pins in the connector plug can slip out of the plug a little and not make full contact check that.

I cannot believe this thread is still here, talk about a walk down memory lane and this is where it all began! Anyone interested in exploring chilled water cooling this is where I'm at with it today. 🆒 I hope you all are doing well during these trying times! Ry...

https://www.overclock.net/forum/62-peltiers-tec/1633988-chilled-water-cooling-vs-3-0-build-log.html If you really want to have a fully operational peltier cooling system this is how to do it using heat pipe air coolers to cool the hot side of the peltier. Ry

Peltier CPU cooling is a very viable cooling solution but if you want to learn how, you need to talk to those that know how to do it, not discredit it. I am OCAddict at overclock.net and this is version 3.0, I am soon to have version 4.0 operational, and FYI, you guys this works! :)...

CPU Throttling is controlled by the CPU itself when the workload causes the CPU temperatures to get too high, it throttles back to drop the temperature to protect itself. Doesn't matter if it is Windows or Linux operating system or any other application for that matter the CPU takes care of...