MEMOFLEX

Distinguished

Joined: May 5, 2012

Last seen: 39 minutes ago Viewing thread New PC build is freezing & crashing ?

Latest activity Postings Featured content About Trophies

- MEMOFLEX replied to the thread Question New PC build is freezing & crashing ?.
  
  In CPU-Z if you go to the Memory tab it will tell you your DRAM frequency. If it is showing 2400Mhz then XMP is off. If it is showing...
  
  39 minutes ago
- MEMOFLEX reacted to Whitlam's post in the thread Question New PC build is freezing & crashing ? with Like.
  
  Apologies, I do have also have CPU-Z. Not sure what I should be seeing that indicates if XMP is enabled or not. If it should appear in...
  
  46 minutes ago
- MEMOFLEX replied to the thread Question New PC build is freezing & crashing ?.
  
  No worries at all. OK so RAM speeds can seem a bit strange when you are learning but DDR stands for Double Data Rate so the 2394mhz is...
  
  Today at 9:23 AM
- MEMOFLEX reacted to Whitlam's post in the thread Question New PC build is freezing & crashing ? with Like.
  
  Mate, you are a legend for sticking with me through this. I've got HWiNFO and GPU-Z - so let me know if there is anything that might...
  
  Today at 9:12 AM
- MEMOFLEX replied to the thread Question New PC build is freezing & crashing ?.
  
  No worries buddy. Sometimes these things are slow and steady. Eliminating 1 thing at a time as you go. XMP is related to your RAM and...
  
  Today at 8:40 AM
- MEMOFLEX reacted to Whitlam's post in the thread Question New PC build is freezing & crashing ? with Like.
  
  Sorry mate, build novice here. Just troubleshooting as I go on this one. What is XMP, and how would I disable it? Not sure what CPU...
  
  Today at 8:33 AM
- MEMOFLEX replied to the thread Question New PC build is freezing & crashing ?.
  
  Those gpu temps look fine. Doesn't mean the gpu isn't the issue but it doesn't seem temperature related. What were the CPU temps...
  
  Today at 8:24 AM
- MEMOFLEX reacted to Misgar's post in the thread Question Orange light on newly built computer with Gigabyte Aorus motherboard ? with Like.
  
  I have several boards with orange "strip lights" that often define the PCB area around the audio codec chip and "audio grade"...
  
  Today at 7:56 AM
- MEMOFLEX replied to the thread Question New PC build is freezing & crashing ?.
  
  What temperatures are you getting on both gpu and cpu at idle and during the stress test? Have you tried to run the system without XMP...
  
  Today at 7:51 AM
- MEMOFLEX replied to the thread Question Orange light on newly built computer with Gigabyte Aorus motherboard ?.
  
  The orange lights on the board are part of the RGB so this is just the standard colour of the board. If you look at any of the marketing...
  
  Today at 7:11 AM
- MEMOFLEX replied to the thread Question First time building PC - Frozen in fear by all the choices! Can’t decide..
  
  It is always a risky decision to buy a gpu just before the new generation releases. The 40 series have been out for a while now and...
  
  Thursday at 3:43 AM
- MEMOFLEX replied to the thread Question Dust build up on GPU backplate ?.
  
  Fully agree on this. It is very easy to create a bigger problem with compressed air cans. Quite often having to turn the can to get to...
  
  Wednesday at 5:03 AM
- MEMOFLEX reacted to Gaidax's post in the thread Question Dust build up on GPU backplate ? with Like.
  
  My take is if it works - don't fix it. The above in general is a decent advice with fans setup and filters, but I definitely would not...
  
  Wednesday at 4:57 AM
- MEMOFLEX replied to the thread Question Dust build up on GPU backplate ?.
  
  I would suggest that the only way to really do this is to prevent as much dust entering the case in the first place. What case are you...
  
  Monday at 6:08 AM
- MEMOFLEX reacted to ohio_buckeye's post in the thread Question Intel Arc B580 or AMD RX 6750 XT with Like.
  
  I will say that I owned a 6700xt which is basically the same as the 6750xt, the 6750 xt is effectively slightly overclocked essentially...
  
  Dec 22, 2024
Show older items
Loading…
Loading…
Loading…
Loading…