Recent content by _C_H_R

Done it, either 1 or another unplugged, even tried 2 install USB, 1 using Ventoy and 1 only win 10 from mediacreation. But still freezes during install, the farest point was Installing updates done

Hi guys, recently I acquired some used & new components to build a home server and once everything arrived I decided to install Win 10 just to do some benchmarks for checking purpose. During the install process the PC freezes and lockup, neither mouse could move nor keyboard could type (typing...

:ROFLMAO: Did that trice, from that page of notifying me the Ram has changed, to BIOS, then put back everything to the case and boot third time. Thanks!!!!!

Very thanks Koekieezz!! with a tweezer I put a bit more force and it went just right in one try to the correct spot! and 4 dims working like a charm!!

Here is it, seems like there is a bent pin over the top right corner. According to bin distribution image on the previous reply it is related with ddr0, is that the problem? View: https://imgur.com/a/TD5aX9t

Heres a image of CPU socket seems like there is little bent pin over the top right corner, and from ur image it is related to ddr0, is that the problem causing A1 A2 not working? View: https://imgur.com/a/TD5aX9t

How can I clean the ram slot? and about the Pin, does a board works normally with like 1 or 2 bent pin?

Hi I recently build a pc using older components that I have for NAS purpose, and whenever I insert any ram stick on A1 or A2 slot (with or without B1 & B2 inserted) the PC wont boot into BIOS, either gets error code 49 then 01 and 03, or stuck on code CC. I tried clear CMOS, testing every single...

I got the 3200mhz part, but regarding intel one shouldn't I increase TDP? or CPU voltage rather than decreasing it? Or am I misunderstood?

I see, but aside from tweaking bios setting and such, what should I do with those physical things that may impact the result? I mean my cooler works out great despite a bit of noise, it leaves 3900x between 73-80C when stressing with new RAM. and 40 on idle (currently I'm using the old 2400mhz 4...

I think its TDP limit from 11400f which is 65W that goes only up to 3100MHz. So, the only conclusion I can take from testing it on intel is that the ram sticks itself is fine but does not work on my AMD setup right?

Thanks in advance! I tried these memory sticks on 11400F+B560m and it worked without instability, however during stressing test 11400F CPU Clock didn't pass 3100MHz which is weird bc it should be at smth like 4400MHz... but no instability spot. Ill follow ur guide by tomorrow to see if I can...

Yes it is up to date since firsts voltage tweak didn't work. and still nothing... I ll follow what kerberos_20 said about unblinking FCLK and UCLK first to spot which instability is in question cause today I tried these sticks on 11400f+b560m it worked out smooth however when stressing the CPU...

Hi, the question now is not even 3600mhz... After all the unstable and effort made on tweaking voltage (SoC to 1.1 and 1.5, DRAM to 1.38-1.39 + set manually FCLK to 1800)I gave up on 3600 and went with Memory Try It! (feature of msi mb) that has an option of 3200mhz cl 16-16-16 and guess...

Just checked... didn't find the Kingston one, checked for G.skill trident also didn't find.... is the list outdated?