Recent content by Abasiczombie

White connector is for the GPU fans and the black connector is for GPU RGB. I never said it had a dedicated RGB extension header. I was asking about using the GPU RGB header as an input for a hub, which would draw zero amps from the header and would probably be safe to do given an adapter is...

I’ve got the 4 pin 12v RGB Halos. Unfortunately I’m running into clearance issues installing them. Didn’t realize the frame was so thick. But as far as the GPU RGB header is concerned, I believe it’s right beside the fan header. I’m sure it would send out the same signal an RGB strip or fan...

My first time messing with RGB, so I’m not sure if the MSI gpu has a proprietary connector or the Phanteks Halo fan frames. This may be way out there, but I don’t have an RGB header, so I ran through all the options for getting RGB fans in my custom prebuilt PC that didn’t involve a new...

Ye Yeaaaa... lol I’ll figure it out. Atleast the USBs are working and I have rear audio jacks 💁🏼‍♂️

Apparently out of the 8 SATA ports in the motherboard, only 4 were actual SATA for the drives. The 2 yellow ports labeled USB3 1/2 are hooked up to the black and blue USBs on the front io. They now work! The 2 white connectors on the front io (SATA style and wire connector style) both labeled CR...

Thanks! I’m over on LinusTechTips and there’s a few guys helping me out too. I appreciate your help

I reseated the connector many times throughout testing. I tested resistance through each wire and there’s continuity, so no opens. I’m not sure if I have them connected the wrong way as I don’t have a manual. I was hoping someone here could know that. I also don’t want to mess anything up by...

Hey everyone. Seems like everytime I have a question google points me to this forum. I’ve searched everywhere and cannot find my answer. I have an Asus M32CD-AS51 [VivoPC Tower]. Motherboard number is in the picture. My front hub has 2 USBs that don’t work. I’ve done USB hub uninstall and...