Recent content by AdriaanC

That is what I did and I still have problems + did a clean install now. Tested on 2 computers. Problems only came around march when I was doing some updates, didnt have any problems years prior.

Hey, I have a hd 7950 from club 3d. It show artifacts and green pixels whenever I use anything else then the windows drivers. Temperatures and everything are fine. Same problem on other computers. Uninstalled everything with the amd driver uninstaller. + registers etc, but problem still...

Hello, As I am not so familiar with older generation cpu's, I wonder what would be the best cpu upgrade for the family computer. And if it is worth to upgrade the current cpu. Current cpu: E5200, 2,5ghz pentium dual core. Current motherboard...

Will i lose any performance if I use the blue. Atm its plugged into the blue port. Motherboard is : P8P67 PRO (REV 3.1)

I have an ssd and a hard drive that i want to plug in. My motherboard has a light blue (3GBs/sec) SATA. A greyish 6GB/sec sata. and a darker blue 6GB/sec sata. It is an intel board. What would i plug these in to? (normal hdd and ssd)

Is it possible my pc wont boot if the heatsink is not attached correctly? It boots in 2 times, everything is spinning but there is no display. I also don't hear any beeps. I unplugging everything but no beeps. I really hope its not a motherboard issue. Motherboard worked with these...

I just bought a computer from someone that is about 4-5 years old. Cleaned out all the dust ( a lot of it). I was wondering if I should reapply the therminal paste? I am planning to overclock the cpu (its a i5 2500k) Temps on idle were bout 30-35 and 60 on load non overclocked. I am planning to...

They are both the same price at the shop. What would you recommend? I'm running an oc'd fx 8150 at 4.5 ghz. 8gigs of ram, 750 watt psu.

Wich one would you get? I can get them for about the same price . Really can't choose between these cards. Anyone got any experience with them?