Recent content by Adrian_ots

Perhaps this is a printer that uses a Photo black cartridge? That's why it would make sense when you print with photo quality it works.

Sounds like you need to clean the head. Either HP's software will provide you a way to do it or you can manually clean them.

There isn't a print head on a laser printer. IF it is a new cartridge check to make sure all pull strips have been removed. Also if it's an old cartridge does it need to be replaced? Could also be the drum.

You'll need a new chip on the cartridges. you might be able to bypass it by holding the stop button when the error comes up however.

BRother all the way in this one. Samsung is notorious for not being friendly to the customer about their printer. Brother on the other hand is very fair when it comes to compatible or remanufactured products. I've been buying cheap products for years from www.suppliesoutlet.com

Usually there isn't a way to manually reset the ink levels without using a new chip. Try this Partial reset: Turn off the printer then disconnect the power cord at the back of the printer. Wait for 20 seconds then press and hold # and 3 while reconnecting the power cord. When the printer...

Well for inkjet i always try to recommend HP because they have the best printer drivers and support. and HP inkjet cartridges can be had from many retailers at extremely low costs http://www.newegg.com/Product/Product.aspx?Item=9SIA4HJ1H38670&cm_re=suppliesoutlet-_-9SIA4HJ1H38670-_-Product...

Hmmm i'd try reinstalling the drivers and also doing a factory reset on the printer itself.