Recent content by akizzle

You shouldn't need to perform the msoobe steps. The issue is that your SATA operation is in RAID and needs to be in AHCI. Go into your BIOS and change it. Reinstall Windows GG :bounce:

Finally fixed! One of my HDDs was causing my Raid Controller to bug out. Removed my RAID 1 Array and Intel RST installed successfully. After trial and error it turned out to be one of my HDDs, even though the drive was showing up in my raid array and disk manager it seemed to be screwing things...

With that installer it abruptly failed instead of going on for 5-10 min and then failing. Here are the log files. add h to both links. ttps://dl.dropboxusercontent.com/u/63941186/rapidstorage/IntelRST_MSI.log ttps://dl.dropboxusercontent.com/u/63941186/rapidstorage/IntelRST.log

So figured out my Windows 8 install was corrupt so I decided to do a fresh install of Windows 8 Pro 64-bit. Formatted my drives and proceeded to install Windows 8 successfully. While installing all of my drivers every single one of them installed perfectly fine besides IntelRST. It seems to...

Yeah it makes sense because I just installed it recently hoping I can use the thermal radar to manage my fans but it sucks!

Thank you for you're help. I did end up uninstalling the ASUS AI Suite II / SpeedFan software and so far no issues. The LogMeIn Drivers have been on my machine forever and I do not think they would cause any crashes so I left that on. Going to let it run for a day or two to see if it occurs...

So After doing some Digging I'm pretty sure I was able to pinpoint it to the RazerSynapse.exe Software that's installed for my Keyboard/Mouse. Here is my debuglog.txt Opened log file 'c:\debuglog.txt' 0: kd> .sympath srv*c:\symbols*http://msdl.microsoft.com/download/symbols Symbol search path...

Have not performed a memtest yet but I had a hunch that it could be my printer driver. I saw tons of errors in my wiatrace.txt file in the C:\Windows\debug\WIA folder. So I uninstalled the printer driver from my machine. Hasn't rebooted yet. I will do a memtest when i get home to doublecheck...

I'm overclocked to 4.5GHz 1.28v and have run Prime95 Blend Test last night for 6+ hours with no errors. When the error occurs I'm not doing anything really. I've ran sfc /scannow and it found no integrity errors. Also have done a DISM re-image of my system. Here is a link to my MEMORY.DMP...

Found this in my Event log however I don't know how to read my MEMORY.DMP file. Also it's about 1.1GB in size! Is that normal? Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 11/6/2013 11:13:56 AM Event ID: 1001 Task Category: None Level...

Just go give an update I managed to reduce the voltage down to 1.28v which helped lower my voltage a tad bit. All in all I think i'm pretty happy. 6 hours running prime95 IBT on Very High

Name: AkiZZLe CPU: i7-3770k Motherboard: ASUS Z77 Sabertooth CPU Voltage: Manual 1.28v CPU Bus Speed/Multiplier: 100*45 RAM: Mushkin Redline Enhanced 10-10-10-27 1866MHz Cooling: Antec Kuhler h2o 1250 OS: Windows 8.1 Pro 64-bit http://http://valid.canardpc.com/7lsmuq Ran 6 Hours on Prime95. IBT...

Been doing some thinking. Should I set my LLC to Ultra High and up my vcore voltage by a little? Right now LLC is on Extreme and I'm thinking that could be why my temps are so high. Any Suggestions would be great. When I run an Intel burn test my temps spike to almost 90 Celsius.