Recent content by AndrewGlenJennings

Aha, So I removed the cmos battery, held down the power button for 15 seconds, shorted out the cmos pins, and let the computer sit for about 10 minutes. also in that time i loosened the screws a little on the heatsink. When i turned the computer on It booted with a message about uefi recovery...

This did not help. I tried it a few times. No change. I tried taking the original ram out again. did the clear cmos header process. and installed the new ram. turned on the computer and got the same thing straight to yellow on the dram light. no display. What else can i try.

Clear CMOS header? turn off the computer and unplug the power cord use a metal object to short the two pins plug the power cord and turn on the computer hold down del during boot process and enter setup to reenter data i never did this during the original ram install. I am going to try this now

I reset cmos by holding down the button that says bios flashback on the back of the computer right? I have been doing this.

This is awesome. I took out the new ram and put the old ram back in. Now the computer wont start at all. Monitor wont turn on. the mother board DRam light turn yellow immediately. Ive re-set the ram many times. I tried pressing the bios flashback button on the back of the computer.

So i did get 1 error on pass 1 of memtest86 with xmp settings. This should be enough to receive a refund from the vendor right? Memtest is still running so i dont know if i will get more errors.

I do have the most recent bio installed. Also when i enable resizable bary motherboard also enabled above 4g automatically. My voltage is already at 1.45 with docp settings, i dont think i can turn it up anymore.

I think I am going to return this ram and get something on the QVL list. I am seeing horror stories about trying to manually oc ram I expected this to work out of box.

I am running memtest overnight, but i think the ram is fine. I entered bios to change my boot priority to run memtest. Changed no settings. Exited bios and could not post. Posted into safe mode and turned off docp. So i think the issue has nothing to do with resizable bar, it was just a...

I did run 4 passes of memtest86 at the default configuration as soon as the computer actually booted. I got zero errors. I am going to run now with docp settings. Let me see what I get when I run 4 passed with docp configuration.

Alright I have Asus TUF Gaming B550- Pro Ryzen 7 5800x3d XFX SWIFT 210 RX 6600 I removed 2x 8gb Ballistix 3000mhz (16gb total) and installed TeamGroup 2x16gb 3600mhz I had to reset cmos to get the computer to post. I enabled DOCP. Computer seems stable. But I cannot enable resizable bar. If i...

Alright so I found a pc tech I trusted and he offered to run diagnostics on the machine for cheap. Left it overnight and he confirmed that all my hardware was working fine except the GPU. I came back the next day with a new GPU and have had zero problems since.

https://www.amd.com/en/support/kb/faq/gpu-131

Auto-Detect and Install for Windows® 10/11* Driver Updates for AMD Radeon™ Series Graphics and Ryzen™ Chipsets this?

Reinstalled windows. Alright so I just reinstalled windows fresh from media creation. I ran the first round of windows updates. but i haven't done the first restart yet to install those first updates. Device manager currently shows amd radeon rx 5600xt with a code 43, and my pci encryption...