Recent content by Ashish_Pundir

Hello everyone!!! Good news first, I fixed it... Everything is fine now... But, before I get to the solution part, let me first thank everyone here who chipped in with their suggestions and ideas. You guys were just great!!! Thanks a lot!!! Now, the solution part, it was indeed the corrupt bios...

Ok guys, here are some updates after trying few other things and doing some troubleshooting. Seems problem is much bigger than I earlier expected: 1. Everytime I changed the setting to higher speed (anything above 1333 MHz) of ram, the system won't boot and boot_device_led would turn red on mb...

@Lee-m Thanks for sharing the information. Meanwhile, I have tried few things as mentioned in my other post, but unfortunately nothing seems to be working as of now. Would love to hear more ideas if you have. Seems its just incompatible with my config.

Hi All, So here are the things I tried, with no success, over last two days. This thing just wouldn't boot at anything over 1333 Mhz, which is a step back from my earlier ram @ 1600 Mhz. Here it goes: 1. I cleared the CMOS first by removing batteries. Then, removed and re-inserted ram modules...

I recently purchased G.Skill DDR3 2133 Mhz (F3-2133C9D-16GXH) RAM to upgrade my pc based on Asus P8Z68-V Pro and i5-2500k. Unfortunately, I am not able to run the ram at 2133 Mhz, even though the G.Skill website mentions my motherboard as supported. Whenever I choose 2133 Mhz or any XMP setting...