Recent content by atenga

I did some research on PCB codes and I determined L usually represents an Inductor. I also have some anecdotal evidence that LB has been used on other PCB's to represent an indutor. Any insight on what inductor and MLCC I need or how to determine that would be greatly appreciated.

Ok so I found a reference image of the back of the card on Newegg Here: https://www.neweggbusiness.com/product/product.aspx?item=9b-14-125-905 C903 is Definitively a MLCC however I'm not sure about LB502. To me it LB502 could either be a small MLCC, a chip resistor or something else entirely...

Ok so I think I determined C903 is supposed to have a size 0402 MLCC on that point. I still don't know what capacitance, Operating temps, etc. I need for it. I will try to test other 0402's and see if they are all similar capacitance and maybe I can determine that aspect but I still need methods...

Yeah I'm familiar and Subbed to rossman's channel. I also think I figured out I need new MLCC for those solder points and not resistors (I think) any advice for figuring out what I need without a schematic.

https://ibb.co/cCnKxe https://ibb.co/ecRCHe https://ibb.co/kpM1Az Hey all I just purchased a Gigabyte gtx 1060 3gb GV-N1060IXOC-3GD Graphics card that is in need of repair. Included are images of the card and the solder points on the board missing capacitors. I need figure out which surface...