Recent content by augusto44

Thanks.

Hello. Thanks for reading my topic. Some IPS monitors have an configuration named "response time" for "optimize" the response time. However is as that naming "response time" is overdrive. Overdrive increases the voltage sent to each pixel, making them respond faster than their natural response...

Hello. Thanks for reading my topic. All right with you ? Well ... I see nvcleanstall being an good tool for customize the big nvidia driver installer. Anyone known if was created an nvidia driver customized used nvcleanstall available for download ? If yes what is the download link ? Thanks...

Really the component is the MMDT3904. Removed the damaged component and replaced with MMDT3904. Now Video card power on. Need tests power on for long time and 100 % for confirm if is having correct voltage and amperage in vcore. Thanks very much for all users replying in my topic. Have an nice...

@drea.drechsler "but the way they work is to throttle the CPU clocks to maybe 800Mhz or so to protect the VRM" All FX cpus the minimum clock are 1,4 GHz ? 6300 and 8XXX are 1,4 GHz minimum. "I'm running an FX6300 at 4.6Ghz quite comfortably, well within safe temp and voltage limits" Which are...

You are correct about overclocking that type of cpu. My topic is about the correct voltage in 3,5 GHz and I not want any overclock.

"Have you tried the latest BIOS?" Yes .. I have used the latest BIOS and unhappily Biostar not had fixed that flaw. "What is curious on the support page for your board is it states the board support FX8300, FX 4300, FX 6100 and even an FX 6200...but nothing about FX 6300" Biostar support had...

@Viking2121 "My chip hit a wall at 4.8ghz at 1.45v, I do remember that, needed 1.52v with load line calibration peaking it to 1.54v to get to 5.1ghz, talk about keeping the thing cool, it was a challenge" Using an copper heat sink air fan is much hard have temperature below of 65C using the...

I have an notebook with exact same problem. That notebook have an Geforce Go 6800. Only happen artifacts if installing the video driver and when trying install Linux crash the installation. That's problem in gpu processor bga or gpu memory area damaged. Solution ? Try use the computer with that...

I not known good thermal pads for memory being GDDR5 to above. For GDDR5 use copper heat sink. Have care if want add thermal pads on back of gpu ... have much capacitors in gpu processor area. Use heat sink in memory and thermal pad in capacitors and VRM.

How was replied for you. "could be any number of things that are wrong" memory damaged or need reballing in gpu processor and memories.

Thanks for replying. "run stress test and then repeat with lowered voltage untill unstable" Unstable mean OS crashing BSOD ? Doing stress test to reach unstable system can damage the cpu ?

Hello. Thanks for reading my topic. That mainboard Biostar A960D+V3 6-X start using AMD FX-6300. OS and softwares work correctly. However the AMD FX core performance boost feature ( single core to 4,1 GHz and all cores to 3,8 GHz ) not work. The mainboard BIOS is AMI version 8.00.15 and...

Hello. Thanks for reading my topic. I want use an correct enough voltage value for AMD FX-6300 thus not wasting voltage and less heat and optimizing NB and RAM settings. II links below is showed some voltages and frequencies about FX-6300. https://www.techpowerup.com/cpu-specs/fx-6300.c1210...

The component is melted .. not is possible read the naming Some people had spoken about SOT363.