Recent content by AuthenticGeek

Build: CPU: Ryzen 5800x MB: Gigabyte B550i Aorus ProAX (Mini ITX) RAM: Corsair Vengeance LPX (2 X 8GB) DDR4 2400 GPU: MSI R9 390 PSU: Cooler Master V750 SFX (750W) I just finished my new build, however, stress testing the GPU causes a black screen crash (FurMark and Heaven Benchmark). At...

So my custom built computer has been acting weird this week. If I leave the computer alone for ten minutes, the display turns off (which is normal), but then the screen turns back on. When I try to use it it won't play YouTube Videos or any media files. I try to play a song on my computer...

Hello, I have been having a weird problem. About 10 to 20 percent of the time, my computer blue screens when trying to boot (it says your pc ran into a problem and needs to restart). After it restarts, it boots up fine. I'm not sure if this is a problem or not. The system has never blue screened...

I just built my computer about a week ago, and it was my first time doing so. There were some problems along the way, but the computer eventually got built. However, some of the problems that I encountered still bothers me. For example, when I plugged in my graphics card, the screw holes of the...

I have a MSI R9 390 for my rig, and it sags a little. I heard decent sized GPU's sag a bit, but I saw a lot of mix responses on the web. Here's a picture of my GPU: http://imgur.com/svy7E3i Is it bad? Should I be concerned?

I think i figured out the problem. I flashed the motherboard with a bios update. Even though voltage results are off from what I set in the BIOS (like .030 to .035 V off), adaptive mode is working properly.

I think i figured out the problem. I flashed the motherboard with a bios update. Even though voltage results are off from what I set in the BIOS (like .030 to .035 V off), adaptive mode is working properly.

Here's the story. I have a i5 6600k processor on a MSI Z170A Gaming M3 motherboard. I overclocked the CPU to 4.6 GHz @ 1.35 volts in the BIOS. I stress tested it and it seems to be stable at these settings. However, in CPU-Z and HWmonitor, my voltage readings say 1.360V at idle and about...

Hello, I have researched for hours, and can’t find a answer to my problem. So I have a i5 6600k processor on a MSI Z170A Gaming M3 motherboard. I overclocked my CPU to 4.6 GHz and found it stable at 1.350 volts. For stress testing, I set the voltage mode to override (or manual) mode. Now that...