Recent content by aveatquevale

Dam that's brutal lol

Do you think I should sell it to a recycler who buys by the kilogram ? Btw I don't know if works 'fine' fine tbh. Hacking the green pin and the ground pin to kick start it shows no superficial problems.

Basically what the title says. The sticker is worn out and gone for some unfathomable reason over the years. It seems to work fine. It is from a pc that belongs to my brother, of which he's long deserted. Pics here: View: https://imgur.com/a/GJDdULk It is a non-modular PSU with the only...

I'm happy to report it worked without a hitch, although I must admit I had my reservations so I spared no expense on precautions, not only a ceramic tile was used, but also bricks on 3 sides to isolate the psu as much as possible without getting in the way of the cables/wires, and a 12 kg fire...

@Eximo , @stonecarver , Thanks for your contributions, good to know. I think I will not rush this and look into more suitable options to power the seat. The psu may no longer serve even as a last resort.

@Aeacus Afaik the motor has two way action. Which in theory means it shouldn't really care ? @DSzymborski Noted. I'll be placing a 40x40 ceramic tile under the psu to isolate it from the surroundings, in case it fails catastrophically. But I doubt it. The motors pull about 15 amps at stall...

@Aeacus , Thanks a lot, you guys have been really helpful. I'm not really hopeful about finding the intended plug for the seat contacts especially where I live, even less so one with the other end that can be connected to an appropriate power supply, a laptop brick or the like that is intended...

@Aeacus , Since there are two power contacts on the seat, one yellow from the molex goes to one contact, and one black from the molex, goes to the other contact, would that be correct ? Another question: It sez 17 amps at 12 volts. Since 12 v is the yellow wire and there are 5 of em coming...

@USAFRet Thoughts on this ? View: https://www.youtube.com/watch?v=SVcXzhLINQU

@USAFRet Tempting fate right now :smilingimp: View: https://i.imgur.com/B6nFkyj.jpeg Joke. Good thing the seat's at the office, and not at home with me at this time. The 'experimentation' will have to happen sooner or later tho. Feeling like a nuclear physicist before the first atomic...

@Aeacus @USAFRet @Ralston18 First and foremost, my heartfelt thanks for dropping in and sparing your time to answer. Secondly, apologies since I should've clarified at the beginning. The seat is for a SimRig I'm building at home, and the electrical power is only needed when I need to adjust...

OK, according to the sticker on the PSU, it has an output rail for 12v 17a, which I need to power an automobile seat. edit: The seat is for a SimRig I'm building at home. Sorry for the confusion. First things first, can it be done ? I have received intel that it is sufficient to use the 2...

Sometimes you gotta roll the hard six, and open the manual i guess :benetton: Green and blue it is, but the labeling is different in the manual lol https://download.msi.com/archive/mnu_exe/psu/MPGA650GF_A750GF_A750GFWHITE_A850GF.pdf

PSU is an MSI MPG A650GF 650W 80 PLUS GOLD, and the GPU is an rx 6700 xt, with two 8 pin power connectors. These are the PSU outs: Which two of them should be connected to the GPU (Red/Green/Blue) ? Thanks !

What happens if i move to a ryzen 5 5600 or 7600, and an amd mobo to go along with them ?