Recent content by avi312singh

I have snapped the metal piece off the end of the aux out cable as while it was plugged I accidentally bent it http:// http:// Anyone got any ideas on how to fix this?

Hi there, As of recently I have noticed there is a shaking noise and not a proper sound coming from the rear left speaker on the rear deck so I popped off the cover and took a look It seems that whenever I push down the cone slightly or hold the wire from two opposite ends (visible in the pic)...

When will the 1070 come out? And the other thing is they're gonna be so expensive but I'll see, it's a good shout

Hi Guys, So atm I have this card: http:// Do i need to get this exact model again for SLI to work or can I get something llike this: http:// or should I just stick with EVGA and get a slightly different model like this: http:// What do you guys think?

The thing is previously I was using only one of the 4+4 pins because stupidly I thought the other 4 pin header didn't fit because the keying was different on the PSU cable and the mobo but apparently that doesn't matter and you're juust meant to push it in anyway. However I didn't know that...

Yes it is, but now I know the exact problem. So your saying I should just buy a new one? Thanks for your help though

Dam, is there no way I can send the Mobo into asus for repair or will it be more expensive

Hi there, Title says it all, ive tried getting it out with a knife, tweezers and screwdiver but nothing works it's just not budging. https://drive.google.com/file/d/0B9nLwiHJ14_6VWNDVkVIZUh2aVk/view?usp=sharing https://drive.google.com/file/d/0B9nLwiHJ14_6TlJieUswNmxtMkE/view?usp=sharing. What...

Ok I think it's melted inside on the connectors side's, now what?

There's a piece of plastic from my old PSU stuck in the socket, which is stopping the new one from fitting in but the old one is fitting in fine. Top Right http:// http:// http:// How the hell do I get this out, Ive tried but its not budging - can you remove the blue plastic connector from the...

Tried with a knife but it's not budging.... https://drive.google.com/file/d/0B9nLwiHJ14_6TlJieUswNmxtMkE/view?usp=sharing https://drive.google.com/file/d/0B9nLwiHJ14_6VWNDVkVIZUh2aVk/view?usp=sharing So I can't remove the blue connector and put it back on lol?

Dunno whether to create a new thread but there's a piece of plastic from my old PSU stuck in the socket, which is stopping the new one from fitting in but the old one is fitting in fine. Top Right http:// How the hell do I get this out, Ive tried but its not budging - can you remove the blue...

Only one of my CPU 4+4 pins (right one) is fitting into the CPU socket on the motherboard, what should I do? PSU : SuperNOVA G2 850W MOBO: M5A99X EVO R2.0 Thanks for help

Wait, I'm also scared about the CPU pin not fully fitting into the motherboard as I can see that it's a CPU 4+4 pin not a single CPU 8 pin. With my previous power supply only one of the 4+4 pins fitted into the motherboard which caused the damage.

Thanks a lot for help guys!! :)