Recent content by BDhawal

Thanks SuperSoph_WD Gigabyte provides a utility called as EZ smart response, which is kind of a Wizard which guides you to configure the Cache system, it sets PC into RAID mode first and then installs ISRT . Next step is to enable the acceleration through IRST utility. Restart the system...

Hi ALL, I am trying to figure out the components for a system which I am building for my friend. The intended work will be Complex 3D Animation work which will include Heavy rendering work. This is the rig which we have decided so far 1. Intel Core i7 5960X OR Core i7 6700K 2. Gigabyte...

Hi All, I am facing a problem regarding a RAID bios. The problem is.... If the power goes off..and when I start the PC again, the Raid Bios loads Cached metadata into ssd and then detects the three drives which I am running, but stops at "Press Ctrl+I to enter configuration utility" and...

Hi, I recently installed ADATA SX300 64 GB mSATA SSD to my GB GAZ68APD3 motherboard. According to specification the SATA2_5 port will become unavailable when the mSATA connector is populated. SATA2 port is at 3Gb/s, hence the mSATA SSD is working at 3Gb/s? This SSD has capability to go...

Thanx! Yes, I am overclocking the CPU a bit, the Base clock is raised to 100.5 MHz and multipliers of all 4 cores are raised by 1 and yes I was monitoring the temperatures too. The "CPU Core temperature" never exceeded 70 degrees(C) and "CPU Core temperature 2" and "CPU Core temperature 3"...

While monitoring my Core i5 2400 CPU through Intel's Extreme Tuning Utility, I observed following things 1. The CPU frequency alternates between 3.3 to 4.1 GHz for each second e.g. for first second it stays at 3.3 GHz and climbs to 4.1 GHz then drops back to 3.3 GHz again 2. According to...