Recent content by blazingkong

turns out it was a bad USB cable causing the bad POST

I just replaced last thing that could be replaced.. the cpu and the problem still there.. I have changed everything now, I have no idea what it can be.. bought post card will received soon so hopefully that can pinpoint me to the right direction

I just built a PC, It always loads slow and starts with a black screen with a white underscore . The underscore jumps around the screen for a few seconds and when it does load the bios and windows loads slowly like in lines like the way a printer would print.. if that makes any sense.. when it...

Okay since no one was able to give me an answer i figured it out.. turns out some games (black ops 2) use the refresh rate set on windows and even tho my monitor has freesync and its 144 refresh rate windows 10 had it set at 60 so everytime it went over 60 which was always the screen tearing...

Yeah I have an r9 390.. freesync enabled.. blacks ops 2 at around 80 90 fps has the same screen tearing that my rl2460ht had but that one didn't have freesync. . Are not all games freesync compatible?

yeah everything is enabled but it doesn't seem to be working i get horrible screen tearing on fps games except for battlefield 4

Just bought an xl2730z turned freesync on but I am getting horrible screen tearing

Well catalyst 15.7 does it by percentage it won't show mhz.. and if I raise the overclock on the gpu do I raise the same amount on the memory ?

what percentage is a good start to raise and what would be too much.. never overclocked a gpu and can't find any answers on google

well the witcher 3 and dying light don't have mantle only one i have is battefield 4 and i haven't notice that much of a difference

okay so i switched the fans from exhaust to intake ( on the hydro h105) and it reduced em by a lot.. i overclocked it to 4.612 now its at around 65 on prime95 but it's on stock voltage at only 1.296 on my 8370.. from what i read on the forums most people have to raise the voltage after 4.4...

yeah they are shouldn't i be able to handle that easily tho?

i overclocked my fx 8370 to only 4.4 stock voltage i have a corsair hydro 105 applied the heat sink again perfectly and still same temperature i have a good case nzxt phantom with 7 fans