Recent content by blizzars

I've tried increasing VCCIO and VCCSA a bit and it seemed to be okay, I'll have to do more testing later today. Will post back if I have any problems, thanks!

I'm on an 6700K overclocked to 4.6GHz. I noticed that I've been getting blue screens with the code 0xD1. I read online this is caused by RAM overclocks (I have XMP enabled) and this will fix it: 0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage Now my...

That's the kind of confidence I like to see in an answer d: Thanks!

Mmm okay. Like I said it still covers the entire other side (and then a little bit, like 1-2 cms), just on the left side it sticks out a lot more. Thanks for the quick response.

I swapped some fans on my NH-D14 and due to the RAM being quite large, I had to move the fan a bit higher than normal. This led to the fan kind of "missing" the heatsink. It still covers the entire thing but the one side kind of spilled over. Will this affect my temperatures? Pics

I just thought the two spots for exhaust would work well with the GP-14s since there is a honey comb mesh that air has to be pushed through. Wouldn't AF fans be restricted by the mesh?

I have a Define S with a window and an NH-D14 cpu cooler on an Asus Z170A mobo. The fans I have to work with are: 2x Fractal Design GP-14's NF-P14 and NF-P12 that both came with the D14 3x PH-F140HP's In my current set up I have the 3 F140's as intakes, 2 in the front and 1 in the bottom, 1...

actually running memtest for 4-5 passes might seem like the better thing to do first.

so far I've over locked the CPU through the bios. I was going to set everything back to defaults and test it out. like you said tho IRQ is a hardware issue so I don't know if it'll work. I'll try it out and report back

Could the overclock on my CPU also be causing it? or is this more of a ram issue?

Here are some dump files Dump File 1 Dump file 2