Recent content by BlueShirtGuy

I haven't figured it out, the fan is intended to be used with the controller in the PSU so i think there is no way to use it without the PSU, too much hassle so i dropped it lol, if you figure out a solution tell me

You might be right, there is a small controller that these two cables were hooked to inside the PSU, and yes i have tested the cable with two holes the same way and nothing happened, it could be that the RGB ground and power line are the same as the motor's 12v and ground, in that case that...

Hey there Paperdoc, thank you for the reply, i have used a USB 3 port and a usb cable to check the 4 lines cable and it turns out that cable is actually for the fan motor, the motor worked but not the RGB, so i believe that's a standard 4 lines Fan cable just with a diferent Plug that i could...

So i got this Non working PSU from a friend and i wanted to reuse the RGB fan in it as a case fan, but the cables confused me since i never seen this type before, so it would be very helpful if someone can tell me which is the fan cable and which is the RGB led cable ?