Recent content by boju

Root directory means the rom file is placed directly to the usb drive without any folders. Cpu, i meant the 8 pin power cable from psu, if you mean actually the processor being installed or not. Manual doesn't say cpu should or shouldn't be installed, just mentions connecting the 24pin atx...

Did you extract the bios file from it's zip folder and placed this file renamed as creative.rom to the root directory on the usb drive? Then plugged this usb drive to the usb port labeled as bios? Just the 24pin atx power cable is required, shouldn't matter if cpu 8pin is connected to...

Yes, you can update bios to the latest on Asus without doing incremental updates like from some other brands. Rebar, are you aware you need to enable above 4g decode first? Different motherboard in video but should be similar with your board. View...

Usually by removing the motherboard.

Does the case have slots for video card etc? That's where the pci usb card would go, nothing to do with mobo io area. Long as you have an additional pci slot for one of these. If not then just a simple usb hub would suffice, like a network switch, plug usb hub to one of the usb ports and output...

Pci usb add-on card or usb hub for external expansion. Either method wouldn't cost much.

Yeah as pointed out earlier, Windows often sets the amount of cores in msconfig by itself when swapping to a higher core or different processor. This would have been the setting to check to avoid reinstalling Windows, unselecting number of processors check box followed by a restart.

Have you checked cpu temperature? Try with core temp. What cooler are you using? If cpu temp is fine then try the following; https://support.microsoft.com/en-au/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

Share a picture of CPUz memory and spd tabs. Just want to check xmp is definitely running properly.

Did you connect video cable to graphics card? Igpu is disabled with a discrete gpu installed. That's the only reason for no display. If you did connected video cable to graphics card and no display then there's something wrong with it.

What sound system is being used? Bit of a stretch that both motherboard audio has failed. I'd look elsewhere if you haven't already like the actual speaker unit for power and connection. Try headphones as well.

Is laptop connected via wireless or ethernet? If wireless, connect ethernet. If ethernet fails as well then buy a new router, looks like the ethernet part of the router is gone. If laptop is connected via ethernet then disconnect it and see if other devices can connect afterwards.

If anyone gets a switch 2, update joy con firmware immediately. There is an issue with them not charging properly.

Probably wouldn't matter so much now but pipeline is a cache file and like anything else like apps on your phone or streaming service on a TV, clearing cache is what you'd typically do first if experience abnormal behaviours. The way the game is designed, accounting for every placement for...

Id try your games rather than rely only on UB. Difference between non OC ~ OC cards isn't that huge and your cpu is capable running any card of that generation and beyond really. Since 50 series, 570 drivers have been a mess. Last known good driver for 30/40 series is 566.36 which im still...