Recent content by Borko1

I think it's a GPU problem, that's why I'm posting it there. I posted this in Displays subforum too but no solutions at all. It's basically the problem of this guy: Link Both displays are tested and are working correctly, drivers are the newest. By the way, this also happens when running a...

Thanks for your replies, I've been researching for a while, just plugged it in and it works. So it actually does not matter if one pin is different.

I have a non-modular PSU, so the cables are from the same PSU. PSU Model: Cooler Master MWE White V2 500W What I am curious about is that every 6-pin to 6-pin adapter or cable extender I've seen so far has the same different upper middle pin as this one. Lower part of the adapter matches the...

Hello, recently I've got one 8-pin to 8-pin and one 6-pin to 6-pin 180 degree adapter for my GPU, because I couldn't close the case. The 8-pin fits good, both GPU connector and PSU cable, but I am curious about the 6-pin one. GPU connector pins are good, but PSU cable pins aren't. One pin (upper...

Any more opinions on this?

Recently I've bought a Sapphire RX 580 Nitro+ 4GB Edition and I decided to overclock it to boost performance by a bit. The thing is, on the manufacturer's site it's stated that engine clock can be boosted up to 1411MHz, but I managed to get it stable at even 1550MHz core clock without increasing...

Hello. Recently I've bought a new PSU and a GPU and I am very paranoid when it comes to these cables. My case is fairly small and isn't made for a decent cable management, but I managed to save some space by pulling the 24-pin cable through the hole on the back of the case. My question is, are...

I will do a repaste when I order a thermal paste, because right now I don't have one. PC case, as well as PSU, was made by some local brand from my country, which uses foreign parts (mainly Chinese) and I got them together for some cheap money. I am new to that air flow thing and I don't know...

I couldn't let it burn for 10 minutes. After a couple of minutes, the CPU began to rapidly increase temperature, it had 83 degrees Celsius at 100% usage and it was still rising. However, I did manage to take photos of voltages. Pre-Test During-Test.

Hello. My computer restarted a while ago when I was surfing the net. It didn't even do a full restart, screen just turned black in all of a sudden. Monitor LED was blinking, keyboard and mouse colors were messed up at first then later they stopped working and long press power button on the case...

3rd update: Ran memtest86 for about 3 hours or so, 0 errors in 4 passes. By the way, usable RAM for memtest was 13,9 out of 16GB because 2GB of memory is reserved to iGPU and about 100MB to system. So 2,1GB of RAM is left out in this test, but the minimum amount of RAM I can allocate to iGPU is...

Nevermind, I solved it by booting from UEFI mode. You just got to wait for about 1 minute before MemTest settings appear. By the way, thanks for help.

Any solutions yet?

Into the motherboard.

I already tried that, the 2.0 drive is 3,73GB.