Recent content by BrianBaker

Ok,here where i stand now..I am believing this to be a hardware conflict..This is what i did yesterday and what happend.i put the OCZ Ram i have in dimm slot 1 and DIMM slot 3(dual channel mode) same as always,System will not post..So i have 2 more sticks of RAM laying around(different...

Thanks for the responce...Ive tried the Ram in 1 and 3 and 2 and 4..same thing happens,no post..ive tried both separately in slot 1,they both work..It could very well be that its not compatiable with this motherboard even though MSI claims OCZ system elite RAM is in there reconmendation...

Not sure what you mean by disableing Dual Channel in Bios,i dont have that option in BIOS..As i stated before,the system will only boot when i have the Memory side by side in banks 1 and 2,the two green slots..If i put anything in banks 3 and 4(green slots) the system won't even Post..

Ok,on that note.....lol,i thought i had the latest version of CPUZ i must have downloaded from an old site.Mkay now it says its running in single channel....Now the bigger issue,why cant i get it to work in dual channel? Why does my system not want to boot when i install the memory the correct...

Thank you for the responce..Thats what i thought with the MSI Boards..the 1st 2 slots are green and the second 2 slots are orange..My system will not boot when i have i stick in bank 1(green) and bank 3(orange)..The system will not even POST.It just completely freezes before it even...

Ok just did a test,from reading other posts..I have removed 1 stick of my RAM..I now only have a 1GB OCZ memory module in Bank 1 the other 3 banks are empty and CPUZ is still reporting that my memory is running in dual channel...Im totally confused now,you might even say im lost lol...I thought...

Hello everyone,i've been reading through a lot of these pages to see if i could figure out why i could not get my DDR2 memory on my set up to run in dual channel(still a lot more to read) My system will not boot when i have memory installed in Banks 1 and 3 like my motherboard manual tells me to...