Recent content by Chup_Gaming

Hey, I wanted to know if you have anything new about the XMP 5600

Definitely understand you, I for some reason had to turn it off because the BIOS reset my setting after I had a software failure in the video card driver which caused the blue screen. I still do not know if it is because of the 5600 that is not supported on 32GB on this motherboard of this type...

<a href="https://ibb.co/xFtNwLP"><img src="https://i.ibb.co/3R9nVdG/2022-04-06-233250.jpg" alt="2022-04-06-233250" border="0"></a> I managed to reach 5600 with XMP .. With BIOS F7B I'll check that it's indeed stable. Normal voltage 1.25V as requested by the manufacturer.

Thank you very much for the update. Uploaded to their website F7B. I tried it, still no life mark on the XMP 5600. But the same operation as before works successfully. F7C is probably another unsafe beta version will be waiting to hear from you if the BIOS is indeed as good as requested for testing.

Because the table says that these processors were tested at different speeds Not registered 5600 .. According to Gigabit the board does work and supports our type of memories and also frequency and CL as well. So I kind of think this is more CPU compatibility. As for the one that works on the...

Agree with what you said but I found someone else with the same board if it processes the same sticks and also had the same problem as ours ... So I tend to think this is a compatibility issue with the CPU and not a motherboard :) As for the amount of sticks? Yes 2X16GB = 32GB 5600 CL36 CORSAIR...

https://www.intel.com/content/www/us/en/gaming/xmp-3-for-core-processors.html Look that 12700K only appears from the 5200 frequency and the maximum 6400 frequency .. Apparently there is a support issue with our RAM processors that we have? 12900K \ F appears in all you know also 5600 .. Also...

Update me, I would love to know what they tell you .. Because they say "it's supposed to work" and that their labs tested the memories I have on version 4.43 and works (again I will note that mine is 4.43.02) I have no clue if it matters or not. Upon closer inspection I noticed that INTEL...

I mean you think it's not a BIOS problem these are a hardware problem of the motherboard in slots A1 A2 B1? B2 works for me on the XMP 5600 with no problem and turns on quickly. I just checked my motherboard serial, you're right. My serial number is exactly as you mentioned: SN21440000XXXX...

Yes, I know. But I sent them, for which I have no clue. You'll have to wait for him to answer you.

I also had a Z270 STRIX I did not encounter any issue after updating the BIOS. Of course it would reset everything to me AUTO and configure everything according to the profile defined by ASUS. Last update was in 2021 month 8.

Do not think there is a need to reset CMOS After re-burning the BIOS. Which he resets the settings anyway. I addressed them directly According to what they say it should work without a problem. Tested the same memory in VER 4.43 What I have and believe that the thread opener is also 4.43.02...

If you run XMP 5600 On B2 only it will work in one slot The rest of the slots are not. To work on 5500 on CL 36 You are running a profile And sets him instead of 5600 then 5500 Do not touch any volt setting or anything of the sort. After setting 5500 instead of 5600 you press F10 on the keyboard...

I saw your help request message! And I had to say, I'm in trouble like yours too! 12700KF Z690 GAMINX G It must be noted that the same memories and the same problem. After 3 minutes of attempts, it shuts down and resets the BIOS. 5600 XMP not working! I ran XMP and did manual 5500 and it worked...