Recent content by CorsairJoseph

Hey Twist, Not really sure why the photo you posted is not showing. Which fan screw did you use to mount the fan? was it from the SP120 RGB fan box? It'd really help if I can see the picture. I've installed the SP120 RGB fan in this case numerous times and never for once ran into this issue.

Thanks for assisting SR-71 OP, I've just replied to your PM. Let me know if you need further assistance.

Those two coolers are actually different. H60 first gen, which is this, http://www.corsair.com/en-us/hydro-series-h60-cpu-cooler and the H60 2013, http://www.corsair.com/en/hydro-series-h60-high-performance-liquid-cpu-cooler. The same series and concept/platform, different ID and stock fan...

Wow! that price is a steal... if you ask me, that's worth the wait. Let me know what your thoughts are once you've played around with the KB.

Glad to hear you've got everything sorted out :)

Thanks for the heads up COLGeek :) Hey Xtreme, Is there anything I can help you with? About our product? RMA? just let me know.

Yup, that's good enough

This is a bit tricky since you are in the UK, it'll be hard to get a layout that's US. Because afaik, all distributors in the UK, by default, they'll UK layout. And this goes for all regions worldwide. You may have to contact the reseller directly and see if they can special order it for you.

In your BIOS, load optimized default then go AI Tweaker and enable XMP. That should take care of it. I would also test each RAM one at the time using the 2nd DIMM slot from the CPU just to make sure it's a memory issue. When test each stick, just leave BIOS on default settings and see if it'll...

That's perfectly normal while the system is booting, then it will slow down once the fan profile you set them on kicks in. This is assuming that it only happens on initial power up, because it should slow down once you've completed loading Windows.

Unfortunately, the case will not support our H105 cooler. There's just isn't enough clearance on top to support 240mm AIO cooler, more so the H105 which is a thicker rad compared to an H100i/H100i V2. There's probably a work around, but that will require some modification. Best is to get a 120mm...

Sounds like a power issue to me. You said that you know that there is liquid circulation and yet there's no pump rpm in your BIOS. What is your CPU temp on idle? If the fans are working when connected directly to the MB fan header and not when connected to the Y adapter, that means you're not...

Can you use the KB's basic functionalities? I'm trying to figure out if you have an issue with power or data enumeration. Make sure your BIOS is up to date, including the USB drivers. You can also try it on a different system and see if the problem will persist. It's always good to know if it's...