Recent content by Cravez

  1. Cravez

    Question Recommended Fan control software that overwrites BIOS?

    Hi all. Thanks for the replies, and sorry for the confusion in stuff. I'm still not 100% familiar in regards cooling and how properly it works etc. I decided to switch some fan headers and de-couple some fans connected together and runs a bit better now. i was more concerned with the PUMP fan...
  2. Cravez

    Question Recommended Fan control software that overwrites BIOS?

    Hi all Recently built a new PC couple days ago, with NZXT H9 Flow case, LS270 360mm Liquid Cooling, bunch of Artic P12 and P14 PST fans in regards cooling etc. All with the computer is fine, however I've noticed the CPU fan connected with the LS270 cooler, and also one of the SYSFans (SYSFan...
  3. Cravez

    [SOLVED] Gigabyte 3080 Ti not recognised on computer ?

    Hoped it wouldn't come down to an RMA but I guess I'll have to go with it. Thanks for the help anyway.
  4. Cravez

    [SOLVED] Gigabyte 3080 Ti not recognised on computer ?

    I don't have another appropriate computer unfortunately, I did contact the seller and they did give me details for an RMA but just wanted to make sure I'm not missing something else wise.
  5. Cravez

    [SOLVED] Gigabyte 3080 Ti not recognised on computer ?

    I did, not all of them but tried two different sets of slots
  6. Cravez

    [SOLVED] Gigabyte 3080 Ti not recognised on computer ?

    Yes brand new, was sealed and everything. I only received it today and tried to install it as soon as I got it.
  7. Cravez

    [SOLVED] Gigabyte 3080 Ti not recognised on computer ?

    Yup. different Display Ports and HDMI slots
  8. Cravez

    [SOLVED] Gigabyte 3080 Ti not recognised on computer ?

    @egda23 Yes and it works fine as I installed the old GPU back into the motherboard using the same PSU and Cable(s) I used for the 3080 TI
  9. Cravez

    [SOLVED] Gigabyte 3080 Ti not recognised on computer ?

    I have a Corsair RM850, RM Series, 80 Plus Gold Certified, 850 W Fully Modular ATX Power Supply. I'm connecting the single end of the cable to the PSU, then the dual end I'm only using one set of 6+2 pins for one GPU power slot. Then doing the same with another cable, if that makes sense?
  10. Cravez

    [SOLVED] Gigabyte 3080 Ti not recognised on computer ?

    Hey all Need some help. Bought a Gigabyte 3080 TI GPU. Installed it but it's not being recognised by the computer and has "no signal" when booting the computer. Now I was using two Dual PCIe 2x8 Pin (6+2) cables (something like this) and connecting both to the PSU to the GPU. So I was using two...
  11. Cravez

    Is my motherboard faulty?

    New motherboard arrived today and GPU is working fine now, so if someone comes across this thread and you've exhausted most options like I have, it's very likely your motherboard is faulty
  12. Cravez

    Is my motherboard faulty?

    Anyone else take a stab at what this could potentially be? I have ordered a new Micro ATX board so I'm hoping it resolves it but am I right in saying this shouldn't be the GPU? Both GPU's didn't work in both PCIe 3.0 slots of the Motherboard and when the GPU's were in the motherboard they were...
  13. Cravez

    Is my motherboard faulty?

  14. Cravez

    Is my motherboard faulty?

  15. Cravez

    Is my motherboard faulty?

    Recently had an issue where I am no longer getting a display through my monitor (i.e "No Signal") via the graphics card. The motherboard in question is a ASUS Maximus VII Ranger. I'll go through steps already taken as precise/concise as possible: - Switched out the current graphics card (Aorus...