Recent content by cynicusprime

Got a 2x1GB Kingston Value RAM set at 667MHz today. They work fine together, but not when I add in my old 2x512 set. So I guess I'll just replace the old with the new. No big deal. Thanks for your help.

Thanks for the response. I tried the 1024 and one 512 in several configurations and still get the restarts. I'm currently running on just the 1024 with no problems. The first one I bought was the Corsair. When I first had the problem, I brought it back and they ran Memtest on it with no problems...

I am befuddled. I am trying to upgrade to 2GB, and every new module I have installed makes my system restart. I currently run 2x512 DDR2-4200s in Slot 0 of Channels A & B on an Intel DG965RYCK. I am adding a new single 1GB stick at the same speed and voltage (MB only takes 1.8V). I have tried...

I seem to be having a similar problem, though I also have a problem with my power switches not working. Everything boots when I plug in the system with the PSU turned on even before I touch the front panel switches. Then after it's all on, the front panel switches don't respond. The front panel...

Update. I got a Raidmax Volcano 630W that seems to have solved my power problem. The case LEDs no longer blink and everything stays powered up. However, it powers up when I turn the PSU on, before I even touch the power switch, nothing boots, and the front panel switches don't respond even after...

Ok, so PSU is the consensus. If I get it from my local Fry's, what exactly should I look for? I do plan to get an GPU probably first half of next year, but nothing SLI or Crossfire. It looks like the two Antecs you recommended have 16 and 19A on the 12V. Is that the primary number I should be...

Voltage 115/230V +3.3, +5, +12 24A, 35A, 12A Current 8A/4A -12, -5, +5 SB .8A, .5A, 2.0A Frequency 60/50Hz BLK, GRN, GRY COM, P-ON, PG Does that mean anything to you?

Wow, I wasn't expecting so many responses so quickly. I'll try the screwdriver connection test later when I have some time, but I wanted to clear up some other issues that were raised. The power supply that came with the case is 350w. I've tried unplugging all drives but the boot (250), but no...

I just put together my first new system in 8 years, and as usual with my electronics, it's not working. Aspire X-Dreamer II case Intel DG965RY board Intel Core 2 Duo E6400 CPU PQI Turbo 1GB PC5400 WD 250GB SATA3 Maxtor 160GB PATA Sony DVD-RW EIDE As far as I can tell, everything is wired...