Recent content by D_G

Sadly didn't use any antistatic other than the general surface that I was building on, as for the thermal paste, apparently Light Loop comes with be quiet's DC2 paste that is none conductive. At the moment the PC is at a PC shop so can't check the BIOS flash but I'll keep that in mind for next time.

To be fair I'm not sure, probably less than a min if i had to say

At the moment I'm waiting for Monday when the PC stores in my area are open so I can have someone check all components individually since I can't do so myself. I'll post again when that happens, thanks everyone for the help so far!

My old PSU can't handle the new GPU :(, as for the RAM, I was using slots A2 and B2 with the two stick setup. Sadly don't have anyone with an AM5 motherboard close by and available, might have to go to a repair shop and have diagnose the setup.

Still can't access slot A1, tried the other 3 with both sticks. Same result. Only difference is when I plug either stick into slot B1 I get a DRAM red light even when not powered on and it stays on till I plug the stick into another slot.

Yes, flash CPU red light into DRAM red light. (removed 1 stick of Ram and GPU, plugged hdmi into motherboard slot)

Still same result :(

Just got my new PC and spent a good couple of hours assembling it. Specs: Case: Be Quiet Light Base 600 LX Gaming Midi Tower MB: Gigabyte X870 Gaming WIFI6 CPU: AMD Ryzen 7 9800X3D CPU Cooler: Be Quiet Light Loop 360mm GPU: Gigabyte GeForce RTX 5070 Ti 16GB GDDR7 Gaming OC RAM: G.Skill Trident...