Recent content by Daniel_Adams

Just did a Cinebench Run with the same -0.08v these are my stats in HWMonitor taken during Pass 5 @Nighthawk117 All stats are running A lot better. You can see performance cores maxing out at 4.9Ghz and 2 of them are hitting 5.0ghz

When I get up in the morning (10:30pm here) I'll do a quick cinebench run and post the HWMonitor stats so you can have a clear picture of what's going on. I really appreciate the help @Nighthawk117. You have been a life saver.

Ok sweet glad the VID / Vcore is looking good. Now I believe the 8 performance cores are maxing out at 4888mhz in hwmonitor after a couple hours of games that is (had hw monitor opened in the back ground.) And encores 3791mhz

So I just read online that VID or 1.4v is what that core is requesting but realistically the vcore at 1.2v is what it is being supplied? So I don't really need to worry about the VID voltage??

I'm talking 1.4v VID the vcores max out at about 1.2. And yeah I probaly could go lower but might push my luck with a bit of a clock boost. I did notice my clock speeds are hitting 4.9ghz now for whatever reason, must be an auto overclock setting in my mobo still

So I thought I would give a quick update. I followed as NightHawk117 said and left the Core Voltage on AUTO and changed the offset. I spent a couple hours tinkering with different offsets, the most I was able to go down was -0.150v which had my CPU sitting at about 59-65c after a 10minute...

So im going to undervolt my CPU and I have a few questions. So from what I have read I need to focus on these 4 bios settings CPU CORE VOLTAGE MODE - I have changed this from Auto to adaptive + offset CPU CORE VOLTAGE - this one im a bit confused as online I get mixed results. Some people say...

Okay thankyou for the reply. Don't you think think that the long duration power limit and the short duration power limit are both set too high? I think its in direct correlation with the cpu cooler setting in the bios too.

This Page is in Advanced CPU off that bat I can see that the Wattage Limits for Long Duration Power Limit & Short Duration Power Limit is set to AUTO 241w which is alot higher then what intels 190w TDP for the 12700k is. let me know what you guys think. Cheers and sorry for the hassle / Stuff...

So Fan Config Didn't Change Anything. I took a look at my bios, which I don't 100% understand everything So I will Attach some photos, If you see any settings which may be auto overclocking or look wrong Please let me know. So These are normal Bios settings in Overclocking all default Does...

As Requested here is a new screenshot of the HWMonitor, I cleared the Min/Max after the first Pass and the screenshot was taken on Pass 5. I'm going to try some different Fan configs then I will check to see if my Bios is auto overclocking if nothing works I will Undervolt. Open for any other...

Yep PC is clean as a whistle, cleaned it all when I installed the 4070ti

Okay thankyou for the reply, when I get home I'll check what the all core clock is set to in bios, which I believe would be on auto. And once I have done that I'll check through the bios to see if there are any other enhanced turbo features. Once that is done I'll redo my benchmark and check the...

When I get home from work this afternoon I'll attach clock speeds when running cinebench for a couple minutes, cheers

What do you think my best option would be, Setting a power limit, or undervolting which would intern reduce my wattage. Can I cause damage by under volting?