Recent content by DanielCalota

Hi , if it was a bios update most likely the settings where setup on default, and you need manually setup correctly again. Try to check bios settings and see if properly setup , you can try disable secure boot and verify for boot to be on UEFI mode and test .

Hi , try with an external keyboard and see if you can access bios , if you can access you need to modify boot settings in order for computer to recognize your HDD OS , UEFi or legacy depend on what settings you had , and if you windows boot try to make a bios update , the battery you can replace...

Hi , check your laptop model and then go on website and first try update bios to latest version , after that , check your memory with memory test from windows and check your HDD with HDD sentinel https://www.hdsentinel.com/, if all ok after this you can try update all drivers and also make...

Hi , first take out battery and also bios battery and press power buton for 15 sec , in order to drain out all curent and also with no power connected try short bios Battery pins for about 5 sec , after that you can measure bios battery to be ok should have 3v no less then 2 , put in bios...

Hi, try to take out battery, take out bios battery and you can measure her and see if is ok , u should have 3v , if is below 2.5 I recommend to change it , also with bios battery out and all power disconnected , try press power button for 15 seconds to drain out curent and after that just Conect...

Hi , if the laptop start try to make a bios update https://support.hp.com/ro-en/drivers/selfservice/hp-elitebook-8570p-notebook-pc/5212912, after that try to check if the laptop is clean and thermal paste is ok , also you can try test memory with mem test and HDD with HD Sentinel , also you can...

Hi , try to make a bios update first and then ,try make a clean windows installation and install latest driver versions https://www.acer.com/my-en/laptops/nitro/nitro-5/pdp/NH.QEUSM.002 , also you need to verify is sistem is clean and the thermal paste is ok , and you can test and see if is the...

If all ok with charging circuit , the battery could drain out completely and could be in protection mode and need to be charged manually, a tehnician could to this in a service .

Hi, first you can take out battery, also if u have acces , you can disconnect bios battery, unplug from power , press power buton for 15 sec to drain out all the curent from motherboard , after that plug in bios battery, if u have a multimeter you can measure to be ok , 3.3 v no less then 2v ...

Hi , if you want to change HDD with a bigger one , you can clone old HDD and I recommend to use Acronis https://www.acronis.com/en-us/products/true-image/cloning/, it is very easy to use and intuitive , after the clone you can take out old HDD and put the new one , if u have space internally for...

Hi, https://www.msi.com/Motherboard/PRO-B650-P-WIFI, first try to make a bios update for motherboard , to have latest version , and test , if you still have problems , just take out bios battery, unplug PC from power source and keep pressing the power button for 15 seconds , to drain out all...

Hi, first try once again and verify thermal paste and if you have termal pad missing , second check the fans to be ok , after that you can make a bios update for laptop , and also make sure you have latest drivers installed , after that you can disable video card Nvidia and try make a stress...

Hi, in this case I recommend to use windows 7 64 bit preferably home edition , also you can install latest driver from Samsung website ,you need to search exact model of laptop , and also you can check memory for errors,https://www.memtest86.com/ with mem test and also you can verify hd with HD...

Hi, in this case you can try change thermal paste with a better one just to check if is a difference https://www.tomshardware.com/best-picks/best-thermal-paste, if bios is up to date , if the fan are clean , and video driver up to date , after change paste you can try testing , you can also...

Hi , in the pic is wifi card for the laptop , that should have connected white and black wire , but that is not the issue , here https://images.app.goo.gl/oWJsuUwSzdz5516y5, on top of the board you see a connector port with a lot of pins exactly on top , that is the display connector , when you...