Recent content by danny2000

Uefi is the newest at 1.9. I tried the adaptors in both slots. The current adaptor is the 2nd that I have tried but supports NVME ACHI and NVME.

Limited-time deal: Fikwot FN955 4TB SSD M.2 2280 PCIe Gen4 x4 NVMe 1.4 Internal Solid State Drive - Speeds up to 7350MB/s, Configure SLC Cache,Compatible with Laptop/Desktop/Ps5 https://a.co/d/0fZJxjo1 Bejavr M.2 NVME to PCIe 3.0/4.0 x4 Adapter, NVME/AHCI SSD to PCIe Expansion Card with...

I need Help With adding a PCIe 4.0 NVME M2 SSD 4 TB on MSI Z87-G45 MB with a PCIe 4.0 adaptor Card inserted into a PCI 3.0 x16 slot. UEFI shows as unknown vendor and unknown device. I do not know if this is possible with my motherboard and I7-4770. I only want to drive for storage. MBD: MSI...

Well thanks. I am trying to find someone who has 3 things working together: Windows 10 64-Bit; Wi-fi 6E router; and a Wi-Fi 6E network card. The posts that I've seen on other sites about the Asus, TP-Link, and a few other brands cards which all use the Intel 210 chip, all cannot see the 6...

Yes, they list support for Windows 10, but states that you will not see the 6 ghz band in Windows 10. WiFi 6E builds on the existing WiFi 6 (802.11ax) standard. WiFi 6E offers all of the cutting-edge features of WiFi 6 and allows access to a new 6GHz wireless band. Microsoft Windows PCs...

Does anyone know of a Wi-fi 6e PCI adaptor that fully supports Windows 10 on the 6ghz band? TP-link states that it only supports/shows the 6ghz band on Windows 11.

Thanks. I believe that the card is about 4 years old (2019); It has never done any heavy anything other than trimming and cutting of 4K 60 FPS videos, but it never showed as being taxed or anything. It still could very-well be the card. I have not crashed or had any errors since not using...

No Colif, I have not tried another slot. I also don't have the dump files, as I did a clean install back in February and I have not tried to use the card again after using Whocrashed to find the error in the dump file. I believe that it was the 'failed to restart" drive error and mentioned the...

Windows 10 Pro 64 bit; 16 gb Ram (no over-clocking); 500 gb SSD; Motherboard: MSI Z87-gd45 gaming with latest bios; Zotac 1050ti. Intel I7-4770 (no over-clocking) 2013 Corsair Enthusiast Series 650-Watt 80 Plus Bronze Certified Power Supply Compatible with Core i3, i5, i7 and platforms -...

I fixed it. Samsung does not enable over-provisioning on their drives by default; They only enable TRIM. In order to turn-on over-provisioning, run diagnostics, perform optimization, you have to use their software. You need to install while logged-in as an administrator, and not use the "run...

I'm interested in getting it fixed. It currently is not using any Over-provisioning disk space none. If someone knows how to fix the software to make it work, and to enable Over-provisioning; Diagnostics; and Optimization, please respond.

It is a total of 500 gb. 465 gb usable, That is the proper amount for a 500 gb drive after formatting and such. The 1st partition is: 100 mb EFI (system partition) ; The 2nd is: boot partition of 465 GB; The 3rd partition is: 509 mb Recovery Partition. I shrunk C: by 47 gb. and tried...

I have a 500 GB Samsung 860 EVO SSD mSata drive with Windows 10 Pro 64 bit installed on it using GPT. I recently did a clean install of Windows 10. Prior to this clean install, Samsung's Magician software was working properly on that same drive and same o/s. It now states that "The selected...

Thanks, I tried those steps, but it is still not working.

While I am actively using the pc. The screen is not locking; it is literally logging me off; I have several profiles on the computer and it does it for each profile This does not happen in Safe Mode, which I'm using right now.