Recent content by Dashhh

The fTPM is the "Firmware Trusted Platform Module" and it essentially stores encryption keys embedded in the chip. If you do not use BitLocker, then just press Y to reset the TPM and boot normally.

"I can't update my bios. I installed the update correctly." Can you elaborate a bit more? Can you confirm your current BIOS version? With the BIOS file on your USB, boot into your current BIOS and access EZ Flash under tools in advanced mode. Select the file and follow the prompts to update.

You don't need a VPN to run a site. Since you host it locally, you will have to configure it's network security locally as well. As far as VPN recommendations for personal use, I like Proton. They're based out of Switzerland, pretty transparent, and I've never encountered any bugs or had any...

Pull the CPU and check for bent pins. Post pics if you are able to and let me know what you see.

You mentioned you keep you cooling fans at lower speeds during idle, this COULD actually cause issues if you have any negative pressure in your case or are running hotter in general. Ramp your fans back up to normal speeds and see if this issue persists. At idle, if you're still radiating heat...

Can you post a pic of the inside of your PC? I'm curious what your airflow situation looks like. I'm still hung up on the memory errors and remember an instance where heat was bogging a GPU down and proccing memory related errors. Also, are you overclocking anything at all?

Replacing hardware aside, update your drivers. Start there, and then maybe see if you can look into event viewer and see if you can drill down an event that triggered at the time of crash. That MIGHT provide some sort of software related information.

Okay, so I found some interesting things in the dump files and with WhoCrashed, a BSOD analysis software. You're getting a lot of memory errors, but also some errors related to software, drivers, and video crashes. One specifically relating to heat. I've seen this pattern of BSOD's before and...

Hi, @nathan_kestier! I'm running your dump files through some software right now and will post it's analysis along with some opinions based off of what you've provided us here in a few. Just wanted to give a quick reply so you know you're not alone in this thread!

What CPU cooler are you using? From the information provided, this does sound like a thermal issue. How's your case airflow? Any negative pressure? You might not be crashing during your stress testing, but note that thermal shutdowns are a triggered event. Your CPU might not be overheating...

While I can't confirm my suggestions will work as you requested, I do have some to give... I also have some questions. Are you asking this question with hopes to use that chip's integrated graphics? Is that why it's not sufficient for you? I have read that the B650i has had some pushback as the...

You too! Keep me updated as you progress through this and I can try and help. The more information you provide up front, the easier it is for us to look into things for you! :)

Oh! Understood. I've been incorrectly under the assumption you can at least get to BIOS after misreading your comments. My apologies. Get a new board and don't overclock this build until you have stable voltages, more PSU headroom (you have about 100 watts, but without knowing how hard you're...

Can you show me your voltage settings for the overclock, please? Set everything back to stock settings, disable your XMP profile, and reboot. Let me know what happens.

Did you change or configure anything in the BIOS after you put this new build together?