Recent content by dddmaniac

hello yes it has, in the video and photos I made you can see it clearly. Just in case I also checked MB documents + physically and there is no led on this place (MSI Z790 Tomahawk WiFi DDR5). Anyway on the video the red light is coming from th ssd unit and not under it. I'm in contact with SP...

Hi again, So I reseted the BIOS, nothing happened. This keeps blinking. I have tested the SSD with Silicon Power program and it shows 0 errors. Temperatures are fine. Took off the SSD and nothing neither. Here are some photos + video of what's going on. photo 1 + photo 2 + video. On the...

Hello, I've done some modifications to my pc (added some argb and switched cables to new ones). So I booted it and a little after detected that the LED on the 500GB Silicon Power UD90 M.2 SSD was constantly blinking amber, it's continuous and non-stop. it starts from system boot (Windows is...

Hello, Maybe it's a noob question, but I'm not sure if it will be correct to do it. I've bought these RAM once I've built my some years ago, Ballistix Sport LT BLS2C8G4D240FSE (28gb), but now I want to upgrade to 32gb and this model is not in the market anymore. I decided to buy this pair...

Hi everyone, At the end fixed it by cleaning the radiator with soap and water + re-applied thermal paste (but this wasn't the problem anyway). Now the temperatures are more than acceptable, even with stock CPU values. Water temperature went from 41,5°C (playing kcd) to 34,5°C... and CPU...

Yes, I'm also suprised when an h115i can't deal with 9700F... About the pump I'm pretty sure it's working as intended, when I'm setting it to more speed temperatures are going down, but idk, maybe it's not enough? How do I check if the flow is correct? It's a loop system, there is no way to...

-Bad mount -> really doubt it, not 1st time I'm mouting this cpu cooler... but well, I will have to inspect that anyway, so I can discard it. -Pump is dead -> I would notice that, becuase if pump is dead temperatures would rise way higher even without load. -Pump is not receiving power -> I...

Hello guys, I've upgraded from i5-8400 to i7-9700F. Now I'm having pretty high temperatures, when with the 8400 never experienced this (which was running everytime below 70ºC) 9700k is rising to 95ºC (stock values) , CPU fans are like at 100% load, which is really really weird and I'm just...

Hello, I have a red led glowing just at the side of PCI EXPRESS where my GPU is plugged in. The thing is I've build this pc like half a year ago and If i'm not wrong this led been glowing from the beggining. I didn't pay attention on it, but now looking into the manual of my mboard it says if...

Hello, I've just installed a new CPU fan (Corsair H115i). Then did a stress test, each core was loaded at 100%. After that saw that the core 01 is 4-5ºC warmer than others. With the old cooler, this core was warmer than the rest, but not with this difference. (maybe 1-2ºC max) Is it normal? I...

Hello, Which one is better? I mean both of them are good with their task, but as for the quality and reliability way which one wins? Thanks,

So, I did it, from 2400mhz 16-16-16-39 1.2V set to 2666mhz 18-18-18-46 1,21V have tried in a couple of games, works fine and stable, now I can leave it like that? To set the default values I just have to desactivate XMP? Thanks