Recent content by didokon

I bought a Noctua NH-D15 cooler and threw the other one in the garbage. I've now managed to OC at 4.6GHz stable at 1.25v with idle temps 10° lower than before on all cores, and under stress it goes to max 63-64°C. Amazing temps with respect to the previous 95*C+ of the H100i. Thanks a lot for...

This is my airflow as of today, maybe it helps you to think of a possible issue with my temps/CPU: > On the right you see one fan, the other one is under it, slightly covered by the HDD bay (which is, however, empty except for the first spot, so air should flow decently anyway). These two...

I have rebooted and it now shows "H100i" as a separate section, with the following result: However, the fans are now spinning faster than usual and very noisy --> Fixed by removing the Software, as I know that the Pump is now working fine. Anyone knows what may be the issue? The i7 itself? No...

I've downloaded Corsair Link, this is what I currently see: (I only see one fan, labeled as GPU Fan, and the other one labelled as "MB Fan 1"; can't see my other 2 from the h100i and one from the front of the PC, is that a mistake of the Utility?)

Hi everyone, I've recently decided to finally solve this issue that has been going on for a while (months). My temps are way too high than what they should be (I think, at least). I've tested my CPU with OCCT and after 5 seconds the test stops because the CPU reaches 92+ degrees. I've changed...

Powerline adapter can simulate wired internet and you can plug it anywhere you want

Hi, I've been having this problem for a while and I've finally decided to ask for help. Sometimes, randomly, when I turn on my pc, the connection takes a while to be recognized by the PC itself (about 10-15sec, while it's usually instantaneous) and then shows up in the network card as aa 100mbit...

Hello, I have tried looking for an answer to my question online but no one seems to have asked it yet. So, I'm pretty new to this UEFI thing, and by following a tutorial today I managed to change my Win10 installation from Legacy BIOS to UEFI by changing the SSD my OS runs on (currently) in a...

Do you suggest leaving stock memory and focusing on a bit higher core clock instead? I can currently reach, with the boost, 1450 or so but used to reach also 1500. Do you think leaving stock memory would allow a higher core clock to be stable?

BTW, gpu z shows that after I increase the clock by 140 now in AB, the under load max clock goes up to 1480! I've read it's this kepler thing, but does it mean that my actual increase on core clock boost was from 1253 (stock) to 1480? So it's not +140mhz but it's actually +227mhz ? Does this...

There must be some other way lol, the ASIC score was 75.7 which is more than average from what I've read... Maybe a driver issue, since it's so new? Maybe a voltage problem? Also I've noticed that the power is almost always at 60-70% while on the tests online I saw an average 100-105%, is it normal?

It's not the gaming edition. Still artifacting, now in Wow, reduced memory to 430 mhz......... disappointing...... Maybe I should lower the memory and increase the core? Idk I want it to be as high as the other overclocks