Recent content by dingo07

HDMI is for residential television DisplayPort is for computer monitors

Like @bill001g stated already, if you connect the laptop via ethernet cable directly to the modem, and reboot the modem, and you don't have internet then your NIC in the laptop is the issue. Whether it's broken or not will need more testing - like are the ethernet settings for the Ethernet...

Does this mean you cannot see the computer boot into Windows? No boot splash screen, no POST info, no Windows login screen and no Windows desktop?

It sounds like the OP spoke to someone - either they work in AV or for a cable company - and started to do research online about Satellite services like DTV needing a MoCA POE and confused it with cable. The fact he knows signal information leads me to think his new job is with a cable...

Is the bunny still alive?

Ohh, well then there u go... build a new machine!

Do you have warranty on the MB? Have you reached out to ASUS to see if they can service it?

Disconnect everything from the motherboard except one memory and CPU and see if you can get into BIOS without issue. EDIT: I read the previous posts fully... sounds like you fried the MB and need a new one

You do not want to use that patch panel. You should remove each cable from it, and terminate each cable with an RJ45 in T568B. Find the other end in the room, and re-terminate the Keystone Jack (female plug in the wall) in T568B if it's not already. Using the punch block will only introduce a...

In order to get Internet to the other rooms in the house, you'll need 2 ethernet cables going to/from the Living Room to the Patch Box 1 cable provides the router with WAN The other cable will need to provide Network to the other locations via a switch IF you don't have 2 cables, then you'll...

It's very simple... there are 8 CAT5 cables that are connected to that punch block. Each cable goes somewhere in the house. Use a Network Toner on each cable to determine where it goes, and label each one. Follow the previous responses... and you'll likely have to replace the punch block with a...

Thanks for the compliment! TheAIO doesn't fit lol - I have it positioned below the case. The GPU temp in the 2nd pic is running Heaven benchmark maxxed out. The machine doesn't ever reach that temp playing CIV VII or KCD2. I also stained the walnut front plate to match my desk. This AIO is...

Is there an updated version of software? I use Armoury Crate then select my RYUJIN/Fan Control tab to change the curves of the Pump or Fan. FanXpert is version 1.1.0.20

Buy a reputable brand like APC - and get at least a 1000 like this...

Yeah, let someone else pack it... BUT there should be at least 4" of foam around the entire PC to be safe, inside a hard case like a Pelican or road case. You don't want to use the blue expandable foam in your picture either - you want open-cell foam like a pick-and-pack- that has give so the...