Recent content by docchirodave

Thanks for all of the help and the encouragement. I'm pretty excited to have such a nice rig. This is the most detailed bios I've ever played with as well. Thanks again guys!

Any other advice on setting up the bios? I've never built a system with such a nice GPU. I've always bought 3 or 4 tiers down from the cutting edge.

After updating windows 10 and the bios, I tried the GPU in the 1st PCIex slot again, and it worked! It's up and running. I'm so appreciative of the help from you guys. Thank you so much!!

Ok the computer posts perfect with the GPU not installed, and running the on-board graphics. Everything else is connected and running and I've installed windows 10 onto the m2 NVMe ssd. What do you advise next? Anything at all we can try before starting from square one and dissembling and...

I'm back at work, so I'll start back at square one tonight. Thanks again for your patience and help :)

After unplugging the GPU and rebooting again with the hdmi in the motherboard, there is that message on the monitor mentioning that the vga card isn't supported by the UEFI driver. We never saw that message at any prior point while reinstalling and rebooting devices.

Again, in my foolishness this morning, when I plugged everything back in one at a time (beginning with the GPU) i forgot to move the hdmi from the vga on the motherboard to the GPU itself. There's a possibility it didn't work at any point.

I hadn't changed anything. I was looking at the monitor. Shut it down, plugged in the mouse and keygboard, rebooted and boom. 1 long, 3 short, and no post.

With such a new video card so you think the bios needs an update?

This is with the GPU taken out and through the mb VGA. http://imgur.com/a/UXcByrg

Yes. I also realized I never tried to boot it with the monitor plugged into the GPU. Still had it plugged into the mb. I unplugged the GPU and rebooted with mb and it comes up. I'll send a pic of monitor

I unplugged then and tried to reboot. Still nothing

I plugged in the mouse and keyboard (usb), rebooted and now the beeps and no post.

I didn't change anything