Recent content by docov06

So I built this loop last summer and filled the reservoir to about 90% capacity. By now, the water level has gone down to about 75% so I would like to top it back off. I originally filled it with a EK Cryofuel clear and was wondering can I just use more of the same Cryofuel to top it back off or...

Forgot to mention, we cleared CMOS on both mobos. And tried different power outlets.

So I have finally given up troubleshooting and hopefully you guys can share your knowledge with me. Heres the part list: CPU: Intel i5 7500 RAM: Crucial Ballistix 8gb DDR4 @ 2400 Mobo: ASUS B360M-A GPU: Nvidia 1050ti PSU: Evga 600B bronze rated SSD: Samsung 970 Evo m.2 So we started the day by...

Also, I forgot to add that when I flashed the bios to 3.1, the system would not boot, it would fail after bios splash screen and would read a 55 post error code, which is a RAM issue. 3.0 and below did not have this problem.

Ryzen 1700X (currently OC to 3.7, custom water-cooled) Crucial Ballistix Sport LT 16GB 2 x 8GB DDR4-2400 EVGA FTW GTX 1080 AsRock X370 Fatal1ty Pro Gaming (Bios ver 2.4) Samsung 960 Evo NvME PCI SSD Corsair AX860 PSU Since I built this PC, I have had nothing but issues with it. From day one I...

Yep, Master is reporting 20c under HWMonitor's temps, everything looks good now. Thank you kind sir!

Just built a new rig with Ryzen 7 1700x inside, on a Asrock Fatal1ty X370 Pro Gaming mobo. Cooling it is a Corsair H60 AIO water cooler. Running idle, using HWMonitor, its reporting temps at 50-55c. During normal browsing, it will hit 60c. And after running a Cinebench R15 test, it maxed at 68c...

My laptop hasn't moved in like 6 months lol. And yeah, it's most definitely some kind of software problem. I at first thought it was the ethernet port going bad but that wouldn't explain why it works perfectly fine sometimes.

Yes, I actually just installed an older version of the Suite and the drivers. Seemed to have helped, for now, its still dropping every couple of minutes.

I have the Killer Driver installed on the adapter but I do not have the Killer LAN Suite, which is the program that came with the laptop. I already uninstalled it.

Problem: So just recently, during the past week, I've been having major issues with my Ethernet connection to my computer. First of all, when I first start up the computer, I always get the Limited Connection error for about 30 seconds, then it disappears and it states that it is connected...

Ok. I've been having consistent disconnects on Rainbow Six: Siege, so I did some research and it seemed some people were able to remedy that by opening that port. I thought I would at least try it.