Recent content by dralaamonirsrg

Beside clean driver install try running the game on def API. I heard dota can run with dx , vulkan and so on. Try and see if you get a better result.

I have a 1080ti. It is still performing very good but...Man when I saw cyberpunk with raytracing I started to think of upgrading it. The game looks defrent with it that am thinking of getting an RTX card. Raytracing is the main advantage here. If it is your thing then 3060ti

Guys...it's Victory!!! Turned out the SATA cable was the fault!! 24h without a BSOD.... Thanks for your support!! Just incase anybody faces the problem should start with same steps I did with you and Physically check the cables and the hardware.. Much appreciated!!! Mr@gardenman Mr@Colif

Just an update...today morning it happened again and when booted to windows one of the hard drives was invisible and I went to check its SATA cable ,found it plugged but kindda bent moving it made the drive showing up again. Changed the SATA cable and re-scanned the hard drive again. Came...

Alright boss, Bios updated. left ram on 3600 on timings I've used the safe ones from ryzen calculator used the ram profile extracted by thaiphoon burner it's like 16-21-21-21 it added atleast 1gb/s read speed filled down each value exactly as it says in the app so far it's fine. You can't till...

Greetings, Nice ultrawide resolution there 😉 Well, I might update again to latest bios.Today have spent the time on memtest64 from usb No errors were found. Removed the old hdd scanned all hdd. Did repair the image from any corruption. Went with ram speed back to 3600 kept the timings at...

Nevermind think I've fixed that now turning system event notification service from disabled to manual xD

Yes sir, 2 sticks same set. For the bios yea it shouldn't be like that but yea 1.0.03 abba I can push FCLK to 1867 fre1 3777mhz timings 16-19-14-16 34 56....1.4v in 1.0.0.4 anything above 1800 fail to boot and I have to reset cmos even timings were unstable. For the Lan driver actually even if...

Thanks for the response, It's 1080ti fe . I do use DDU each time I update drivers and I don't include anything in installation except the drivers. Could it be really MSI afterburner? Yes sir. Indeed that is my motherboard. I actually was on the latest bios. But latest bios was kind of weird...

It happened again unfortunately... So memory corruption it is? how should I fix it? here is the dump file from today https://drive.google.com/file/d/1QuQIb9gjHs7rIM5KCsd7xQ_g9wmpFYZR/view?usp=sharing Running MemTest86 now booted from USB Will see what i will get there not sure if it is testing...

Greetings, found these dump files saved in the folder: https://drive.google.com/file/d/1yGdh7SEoKZNb-KAEO4SV2DxbidBynjYt/view?usp=sharing I have changed to small mini dumps but the bsod did not appear yet since last time I loosen ram timing abit Will keep restarting to see if it happens xD

Good evening folks, Would like to ask as am getting this weird BSOD ‘sometimes not every time’ when restarting or shutting down pc. Am on win 10 pro latest build fully updated. cpu ryzen 3600 Ram vengance pro 3600mhz Power supply corsair rm 850x Recently been tightning the ram timings I assumed...

Thanks for the reply, Tested again using these settings on prime max power test voltage was almost always 1.165v while clock speed was 3774mhz temp was 70 c If it can run stable under 100% on that low voltage what makes it unstable doing 4.2ghz at 1.3-1.35v I don't get it. Yet it keeps going...

On PBO voltage offset - 0.750, prime not crashing max voltage seen was 1.3 it was almost always 1.27v clock was 3873mhz for all threads temp maxed at 72 c seems that CPU runs 1.4v while it's not under load and decrease voltage with load. what do u recommend?

Well at 1.4v was alt+tab within the game and run youtube and my game crashed. Below 1.4 I get frequent blue screens under load like repeating the cinabench test. Here I reverted to PBO and put voltage to offset - 0.0750 and here is how it looks like while call of duty running at the background...