Recent content by dylemmaog

it basically started flatlining 3-4 minutes into the test because my temps were going into the 80c+. Is that honestly realistic average though? In my games I never even hit above 70c with constant 1.35v static voltage. I sit around 65c when gaming at 4250 all core, 1.35v set. It sat at about...

Motherboard defaults, ryzen master OC (for now). Used ryzen master, 4250 all cores, static 1.35v for this test.

left it open during full 10 minute test. Max never went above 1.35

so are you saying my ram or cpu are bottlenecking the performance of my card to go any higher?

This is mine, and others with the same card same overclock or worse or maybe slightly higher overclock have much higher rating than me. I have all programs closed, all background stuff closed. I don't get it. MSI B450 TOMAHAWK MAX (MS-7C02) Performance Results - UserBenchmark for reference...

------------------------------------------------------------------------------------------ I'm currently on 4250 all core 1.35v (3600x), on idle I'm in the 40c temp wise, 60s when gaming. (sometimes hit low 70s).

Where would I find that in HWinfo View: https://imgur.com/a/njmZLsR

That's what I'm saying, when I first got this 3600x, the turbo is non stop high 1.35-1.45v or even higher sometimes, and the temps get toasty but I understood AMD ryzen series can run pretty hot. Why would they make it that way stock if it's so bad?

vcore

I 100% for sure get much lower temps when setting voltage, gaming with auto overclock I've even seen the CPU gets in the 80s because it's cranking out voltage like crazy. I don't think hitting that high seems ideal, also stock basically does the same thing, very high jumps in voltage and...

That's the thing, when I use auto overclock from ryzen master, sure, the hz can shoot up to 4.4 but the voltages are crazy, anywhere from 1.2-1.45v, mostly being on the higher end. The CPU can hit in the 70c with that. Setting voltage to say 1.325v and 4200 all core (this is where I find...

I run malware scans quite often, nothing pops up. (just did a scan just now) Looking at some MSI afterburner youtube videos, looks like their memory clocks are also always max, guess it's just normal.

Oh I'm sorry, I meant memory clock. Is it normal for memory to always be 100%?

I've tried everything to fix it. I did completely wipe all drives with DDU and still no change.

I read a few places that going above 1.325 voltage on 3600s is considered a bad thing for the chip. Is that true and why? Currently I'm manually OC'ing to 4200 all core at 1.325v. But I'd like to go up to 4300 or even 4400 if my temps look fine with higher voltage.