Recent content by edikecske

I forgot to mention that I already tried that but didn't work out. Same thing, turns off after about 10 seconds. I have a friend who works with cars, he'll help me connecting a different kind of BT transmitter to the back of the original head unit which will use the CD input. In this case I do...

Hello! I bought a Baseus bluetooth - aux transmitter which gets its' power from USB (5V 1A). I also bought a cigarette lighter USB adapter for my Chevy, plugged them together but the BT device turns off after 10 seconds. I tried with an other USB adapter, if I start any music from my phone the...

Hello, I have a Technics CD player connected to My DE-475 amplifier via Toslink cable. It has this problem like when you unplug the cable and no sound going into the amplifier. It happens randomly, sometimes after 1 hour and just a very few, sometimes it is like someone plugging the cable in and...

Yes, I installed every available driver. Well, this is very interesting. I updated the op. system because Win 10 said that my device is compatible with version 11. Now I put back my old Qualcomm adapter to the laptop, task manager can recognise it, but it is jumping between "ok" and "alert...

When I had the Qualcomm adapter in my laptop, I installed every newest driver and BIOS, but neither of them solved it. I installed every latest driver from Dell and Intel too. I have the latest BIOS version, according to the version number, but the release date was 12/2021 in CPU-Z and on...

Hello, I recently bought a used Intel 9462NGW card for my laptop, because the original Qualcomm QCNFA344A had an error code in task manager, and the wifi was not functioning on my laptop. I installed the new part, but my machine didn't recognise it at all. In task manager the Intel network...

I already did that, the receiver is not able to convert the stereo signal into surround. My plan is to buy a 5.1 decoder, plug my PC and CD player into it, and then connect the decoder’s multi channel output to my receiver.

I went through the receiver's specs and it has Dolby Digital, DTS, and Dolby Pro Logic decoding, and also has an A.F.D. mode that I can turn on. I do not know much about these things, would it work?

Hello, I recently bought a Sony DE475 surround receiver with a set of speakers. I want to buy a CD player to play my music CDs on it, but most of the older players only has RCA stereo output, rarely Toslink. If I connect it to the CD stereo / Toslink input on my receiver, can I change the...

Thank you for the answer, now it is working as it should. :D The solution was that I had to select 'front speakers' on each 3 outputs instead of 'front', 'surround' and 'center & subwoofer'.

Hello, I bought recently a Sony STR-DE475 amplifier with a set of speakers and subwoofer. I connected the amplifier to my PC via 3 jack - RCA cables on multi channel. In Realtek Audio Console if I test each of the speakers they works fine, but if I play some music, the surround speakers are not...

Thank you very much :D Unfortunately, my motherboard still doesn't work. It probably has a short somewhere. The BIOS must to be fine because the writing was successful on both chips.

It is Rev 2.0.

Hello, does anyone have a bin file for flashing this motherboard's bios chip? On the official site there is only a setup file witch I cannot use. I also tried renaming it to .bin, but the programmer says after writing the chip that the file is not compatible with the bios chip. Thanks in...

I will give it a try, thank you. It is Windows 10.