Recent content by EPoXTech

Hi There is something wrong with the board as it should not be displaying zeros. I would suggest contacting your local EPoX branch for assistance. EPoX International, Inc. Web: <A HREF="http://www.epox.com" target="_new">http://www.epox.com</A> Specifications subject to change without notice.

Hi You can use AGP 4x at 1.5v only. So 4x and the newer 8x are compatible. Of course 8x is preferred. EPoX International, Inc. Web: <A HREF="http://www.epox.com" target="_new">http://www.epox.com</A> Specifications subject to change without notice.

Hi The board is EP-4PCA3+ http://www.epox.com/USA/product.asp?ID=EP-4PCA3plus EPoX International, Inc. Web: <A HREF="http://www.epox.com" target="_new">http://www.epox.com</A> Specifications subject to change without notice.

superk Thanks for the comments. Hi All Specs on our board can be found here: http://www.epox.com/USA/product.asp?id=EP-8KDA3plus EPoX International, Inc. Web: <A HREF="http://www.epox.com" target="_new">http://www.epox.com</A> Specifications subject to change without notice.

ChipDeath Yes setting the MAC in the BIOS can help. 1) Restart the system. 2) Enter the CMOS. 3) Enter the Integrated Perip. section in the bios. 4) Enable Machine MAC(NV) Address and enter a MAC address. (Example 000456) 5) Save and exit the BIOS. 6) Retest. EPoX International, Inc. Web...

baldurga Thanks for the feedback. Spain dealers are listed here: http://www.epox.nl/english/purchase/spain.htm If you need further assistance please give our EPoX Europe (www.epox.nl) office a call or email. Thanks! EPoX International, Inc. Web: <A HREF="http://www.epox.com"...

cris1145 I do not see installing drivers causing the system to have boot problems. Here is a list of things to try (Skip the items you have completed already). 1) Check CMOS clear jumper JP1 (JBAT1 on some systems). Set for CLEAR for 5 seconds, then move back. 2) Check CPU host clock jumpers...

Takhisos Have you tried using another video card to see if the ATI is the problem here? EPoX International, Inc. Web: <A HREF="http://www.epox.com" target="_new">http://www.epox.com</A> Specifications subject to change without notice.

Hi srotwell If you are having trouble with stability try the following multi-step procedure. 1) Update to the latest BIOS from our website if possible (if you have not already done so). 2) Load the BIOS defaults (optimized or fail-safe). 3) Shutdown and remove all cards and devices EXCEPT...

:) EPoX International, Inc. Web: <A HREF="http://www.epox.com" target="_new">http://www.epox.com</A> Specifications subject to change without notice.

Hi Blah Thanks for the comments! EPoX International, Inc. Web: <A HREF="http://www.epox.com" target="_new">http://www.epox.com</A> Specifications subject to change without notice.

Hi ChipDeath Yes the one and the same. I now frequent many boards looking to offer assistance to EPoX users. As far as 8RDA goes - since its been replaced by newer models we do not stock it anymore. The last ones are sold on epoxstore are rev 1.x EPoX International, Inc. Web: <A...

Hi srotwell 1. Power off. 2. Set JP1 (or JBAT1 on some systems) to CLEAR. (Refer to manual for jumper location.) 3. Wait for 5 to 10 seconds. 4. Set jumper back to NORMAL. 5. Power on. 6. Enter CMOS and set appropriate settings or load defaults. EPoX International, Inc. Web: <A...

Hi All Noticed this forum has quite a lot of EPoX activity. I, along with the rest of EPoX USA support, are here to help our customer base as much as possible. I will drop in the forums here as time permits to help answer your questions regarding EPoX products. For more information about our...

Yes I do. Email support@epox.com for confirmation. EPoX International, Inc. Web: <A HREF="http://www.epox.com" target="_new">http://www.epox.com</A> Specifications subject to change without notice.