Recent content by erminnz

Just dont get msi mech if you have gigabyte board, there is a big issue with that particular combination, pc not turning off. I learned the hard way.

Thanks guys

I had been using Asus Strix 7.1 Wireless headset for 5 years and yesterday right side stopped working. Now it may sound silly but here's the thing. What I did differently from all the years of using it is that I didn't turn headset off when switching output device to speakers, so it stayed...

If you don't bother to list your specs with 20 secs of your time why would someone bother to help you there. Even if it was irrelevant as you call it.

Did you make sure that you connected it in correct orientation so the ground pin is connected correctly? Check your mobo manual to see where it should fit.

ok you have probably tried this but does it get any different if you lower saturation to 100 ?

I have tried both cards and mech x2 is much louder. I'm happy with Sapphire now. Also don't get mech if you have gigabyte board.

I'm glad you solved it. I ended up getting another brand gpu, Sapphire Nitro RX 6600 XT, working normally pc shuts down. I hope your solution can be helpful to others

So today after playing 2-3 hours with my new gpu I noticed that it runs pretty hot. It's Sapphire Nitro+ model, and temperatures were in 70-75 range while hot spot was 85-90. I rised up fan speed in amd software and got some good improvement. New temperature doesn't go above 65 degrees and 80...

So you are stuck in a restarting loop, 5-10 secs until it restarts automaticaly. Type in a search bar 'pc keeps restarting', there are plenty topics, until someone more experienced here helps you.

Alright, thanks.

After I installed the newest version of CrystalDiskMark I'm getting much better result there. It's close to result from Magician as well. Still I'm not sure if it's good enough. I'm posting screenshots: View: https://imgur.com/a/SfcYNeW View: https://imgur.com/a/ZV7qc4Y

I have Samsung 980 nvme m.2 500gb. I've never done benchmark before so today I did it in CrystalDisk program. Speeds which I get are: Read around 1670 and Write around 1780. I don't know am I getting what it is supposed to, as I see that it can go much further in speed. It is installed inside...

You should describe the problem more precisely and also post system specs.

Hello everyone. So today I upgraded gpu from gigabyte gtx 1060 to msi rx 6600 mech x2 8gb. The problem is when I want to shut down pc it immediately turns back on after 3-4 secs. If I put back the old gpu the PC works normally. I came across internet to similar topics from people owning same...