Recent content by Fallensach

Thanks anyways ill be returning the Ram tomorrow and hope that it was it

It does work because i built my brother one with the exact same specs only that he has an ryzen 1600x instead of 1700x

Yes ive tried to use 1 stick at a time in correct slots and still the same happens

I dont own any other ddr4 ram sticks nor can i test any

I tried a DVI and HDMI cable without any luck both connected to the gpu and not mobo. I mean that when i boot with 2 Rams of sticks i get the exact same results as without any Ram plugged in as if it wasnt recognized at all. Specs: Seagate Firecuda 1TB 7200rpm 64MB be quiet! Pure Rock ASUS...

So my new pc boot but there is no signal in the screen. Everything else works, mouse keyboard and rest of the computer light up and work but the pc wont get past post screen so it just says no signal. I tried removing 1 ram and with both slots and it yields the same results. The thing that makes...

i tried breadboarding without any luck at all. I just hope that the Ram and CPU survived as you said since im probably returning the mobo for a new one in hopes that i dont have to pick up new RAM too

Yes everything worked until i rewired and shutdown the pc. Afterwards it wouldnt boot at all.

I accidently had the PSU switched on (PC was off) while plugging wires on the MOBO and now the PC won't start at all. What could be damaged? I've tested the HDD, SSD, GPU and PSU and all of them work fine. CPU and Ram can't be tested due to different platforms. Is it possible that the mobo died...

Yeah i was going to do that as my last resort. Starting by using the 2 pins doesnt work either. Do u think that any component could have gotten damaged? i know for sure that the psu gpu ssd and hdd survived. I havent been able to check the ram or cpu due to previously only owning an older intel...

Yes ive tried it. Ive also tried breadboarding without much luck either. What are the chances that the mobo died?

So i just finished my ryzen build and everything was fine, i got windows and all the drivers installed. But i decided to open up the pc and reconfigure the fan headers and forgot that the psu was still on (pc wasnt on only psu switch with cable attached) and now the pc wont turn on at all. Is it...