Recent content by fireboy1

Hi I am hoping that one of the experts here can help me with a problem. I bought the Hue+ lighting system for my NZXT Phantom 4 case and installed it per its instructions. It connects to the USB 2 port on the mainboard which takes away the USB 2.0 ports on the top of the case. Lighting is superb...

No bent pins but the memory is faulty. Both seem to be bad. If they are bad then I am pretty sure the when the PSU shot circuited it probably took it out too.

I actually never considered it could be a short circuit. I did install all of the stand off connections before installing the mb but I will definitely go back and recheck everything you listed. You mentioned something about an IO shield. The only thing that came loose in the box was the screws...

hi my name is James and I am a firefighter for my city so my responses may be a slow but I assure I WILL answer. I had an off the shelf Dell XPS 8700. The motherboard died so I replaced it with a Gigabyte z97x gaming 5 but kept the i7-4770 3.4 ghz processor with the tundra TD02-E water cooler. I...

Okay I will turn them over and have them suck air through the cooler and out of the case. I also made the necessary changes you suggested and hooked both fans to the cpu header. I can not thank you enough for your willingness to help those of us that are not as well versed in the technical...

Here are the photos. http://imgur.com/a/5p5Lp

I apologize i should have beena little more clear. I had to change up the way the liquid cooler was installed in my case due to the size of the motherboard. Both NZXT builders of the case phantom 410 and Silverstone Tech builders of the tundra td02-e, instructed me to install the cooler in the...