Recent content by firtle

Hi. Well I got my hands on a slot 1 terminator card and the board wakes up - but only with the SECC pII-450. It wont seem to work with either the SECC2 pii-450 or a SECC2 piii-450 I have. As for when the board works, it does so as far as detecting the keyboard, then stops... any ideas why??? ;-)

Well as far as I can see, there are no jumpers.. but here is something I have found.. though I'm unsure that its the reason... The product overview only allows for PII with SECC packaging.. now one of my processors is a PII-450 with SECC and the other is PII-450 SECC2. They both have the same...

Thanks for replying.. I am wondering whether its my power supply.. when I connect it and power up the Processor fans start up, but nothing else happens.. As I am a novice at messing aroung with MoBo's I'm at a loss to know whether this would indicate everything is ok with the power supply or...

Why do I want to build it? I had a couple of PII's lying around, a compatible scsi disk and I managed to get hold of the board. It is used and therefore I guess, could be defective... Thing is, both PII's work fine and as far as I can see from the Intel literature, they should be compatible...

Unfortuantely I dont have a termination board to test this out...

Hi, I recently acquired an Intel L440GX+ dual processor motherboard. I have 2 PII-450 processors: SL2U7 dB0 0652h 450/100 512 T6P-e/A0 ECC B1 SECC 3.00 SL358 dB0 0652h 450/100 512 T6P-e/A0 ECC B1 SECC2 OLGA (although not the exact same match, the should be ok according to Intel criteria - i...