Recent content by Flawedhatred

I should also add I’m aware that the 7900x3d is officially only going to run up to 5200, but I can’t even get the ram to run at 4800 stable let alone 52!

I recently upgraded to an AM5 setup, specs below: Asus RIG strix X670e-F motherboard Ryzen 9 7900x3d 4x G.skill trident z5 neo rgb series (amd expo) DDR5 16gb 6000mt (F5-6000J3038F16GX2-TZ5NR) Evga ftw 3080ti Super flower titanium 1000w My ram will not run higher than 3600mhz, I’ve tried...

Just wanted to come back and update the thread, my interim mATX board ti test showed up, plugged it in and tested, started right up. Introduced each piece of hardware, ram, GPU, SSDs one by one individually and they all worked so o have co firmed the motherboard somehow was damaged, although I...

I apologize, I use SSD loosely, I mentioned removing all hardware that was not present the last time the PC was working, and that I did a piece by piece test, removing all pieces of hardware 1 by 1 and testing, including the drives. And yes the motherboard has 2 nvme ports that support both the...

Yes that is my motherboards manual. I still have all the original packaging and I did read through the manual and confirmed that all my parts were supported. The PC worked perfectly for 2.5 years and after the most recent attempt to install the new 990 pro, which is supported, something I’ve...

Sorry for the delay, appreciate the help I took a few more than 4 photos just trying to get as much detail as I could. Let me know if o can show anything else! View: https://imgur.com/a/6OTZlQ1

Motherboard vendor brand, Asus, I purchased from their site for this series of MB

Only the cables that came with each PSU were used yes. I haven’t noticed anything off with the MB or the 24 pin connector but I’ll post some pictures once I get home! The mounts I’m referring to are a pack of SSD mounts to Install the SSD, I’ve since removed the SSD and the mount to make sure...

I’ve also tested the motherboard outside the case to ensure the case isn’t shorting anything. Still no change in behavior. Figured out my previous PSU was in eco mode which is why the fan didn’t spin initially. I’m becoming more suspicious that the motherboard is the issue, and that maybe the...

I actually just replaced the CMOS battery about an hour ago to eliminate that. Pulled the entire board out cleaned everything reset the CPU checked all the front port connections and nothing seems loose. Nothing is inserted Into incorrect spot. Just to be safe though I completely disassembled...

I just read that link you sent, that is the exact process I used.

The second PSU was a EVGA 1000w G6 There may not be a speaker, but normally when I turn it on I hear the beep so I had assumed. I jumped the PSU using a paper clip and tested the fan, the fan on the super flower didn’t move unless I slowly pressed the on button, which is what prompted me to...

There are no LEDs on at all

I have a gaming PC I built myself that he had for 2.5 years. Recently I bought a new SSD, a Samsung 990 pro, I went to I stall it but didn’t have the right mounts so I put it back together and the PC worked fine. once I got the mounts I installed the SSD. Plugged everything in and now my PC...