Recent content by Floydsound

Thanks a lot for the clarifications, guys! Nothing to be alarmed, then :)

Hi, everyone! I've been playing Diablo 4 and, since it's common for me to have long sessions of daily gameplay (approximately 3h), I wanted to make sure that these temperatures are safe for this kind of routine: View: https://imgur.com/a/44lKRbP This is my system: - Ryzen 7 5800X3D - Asus TUF...

I RMA'd the RGB and bought the one you suggested. Everything running smoothly at 1.35V and 3600Mhz. Thanks, mate! :)

Since English is not my first language, I'm not sure if I got the tone of your post :smile: Are you criticizing the RAM or my decision?

Thank you for sharing your knowledge, Tolis! After installing both sticks separately, here's what happened: - On one stick, the XMP worked on default settings (3200MHz at 1.2V) and I had no issues in Windows. - On the other stick, after doing the same thing, the PC restarted twice in a row...

Hello, everyone. This issue has been driving me crazy. I had been using 2x16 Trident Z 3200MHz RAM for a few weeks with no problems, but decided to return it due to a faulty LED. Then I ended up buying 2x16 Corsair Vengeance RGB RT 3200MHz. I've installed it a few hours ago and have been trying...

Hi, everyone. What would be the safest way (compatibility wise) to control these 3 RGBs with a single reliable software that won't cause conflicts? This is my system: - Ryzen 7 5800X3D - Asus TUF Gaming RTX 3080 V2 OC 10 GB GDDR6X - Corsair Vengeance RGB RT 32 GB (2x16) DDR4 3200 MHz - MSI MAG...

The drive? But I don't think it's possible, because today I actually installed a new M.2 SSD and removed the old SATA one that had the system. I also don't think it could be the motherboard, because I tested both RAMs in all 4 slots, and the problem occurs with the same one.

Thanks for the recommendations, Lutfij! I have just done what you suggested (testing in my brother's PC and formatting), but the stick still behaves the same way :(

Hi, everyone! A couple weeks ago I purchased a kit of 2x16GB G.Skill Trident Z RGB DDR4 3200MHz (model 3200C16D-32GTZR), but one of the sticks is driving me crazy. In the first week of use, the RGB on both sticks worked as intended. I controlled it with MSI Center (my motherboard is a B550...

Thanks, dark lord ^^ Would you recommend any tweaking on the voltages? Is it possible to modify those "VIN" voltages? Is 2v too high for them?

Hi, everyone! First of all, I live in Brazil, and we're in the middle of a freaking hot summer right now. Well, I recently built a new PC, after 6 years, and I'm wondering if these GPU, CPU and motherboard temperatures are OK for my setup. My VCore is set to 1.14v, and the rest of the voltages...