Recent content by Foksrad

For the moment I will install the graphics card horizontally. However, I hesitate between your two suggestions, Either : bottom as intake (UNI FANS) top as exhaust (UNI FANS) side as exhaust (AIO FANS) + AIO behind the fans Either : bottom as exhaust (UNI FANS) top as exhaust (AIO FANS) +...

What about the Xiaomi Mi Curved ? It has the specs you mentioned and it's really cheap.

Do you have a suggestion ?

Oh yes, sorry, I made a mistake So this configuration would be the best ? bottom as intake (UNI FANS) top as exhaust (UNI FANS) side as exhaust (AIO FANS) + AIO behind the fans

Great, thanks for your answers! So the best configuration would be : top as exhaust bottom as intake side as intake + AIO behind the fans Is that it? Also, do you have any advice for my future build? I will soon receive my new components but I have never mounted watercooling and changed the fans.

Okay, and isn't there a risk that the gpu heats up more since it's closer to the glass ? By being vertical, isn't there a risk that the gpu will bend a little with the weight ?

Is this case sufficiently protected against dust under negative pressure? And this configuration would be interesting with the vertical gpu?

All right, thank you, And if I put the graphics card vertically, would that be a good idea? It's pretty big. The problem if I put the fans on the side that push the air through the fan, I'll have a negative pressure and I wouldn't like to have too much dust in my case ^^' I don't think the...

Hello, I ordered the Lian Li PC-O11 Dynamic case, the AIO Galahad 360 and 2 packs of 3 Uni Fan. I would like to know what would be the best configuration for airflow and aesthetics. I also have another question, if I mount the watercooling on top, could I put 3 uni fan on it and the 3 fans...

It looks very constraining so I'm going to stay on the configuration with the radiator on the front and the two fans on the inner side of the case. Thanks again!

Hey, I have one more question. As it is possible to mount the fans in front of the radiator, can we install 4 fans of 140mm on the Kraken x63 at the same time? Two on each side. I don't know if it would be efficient but I don't see why not. Moreover with four fans in front and three in the...

Wow thank you very much! I'll try to set it up that way. You helped me a lot and I am very grateful 😊

Ok thank you very much for these precious advices you are a boss I prefer performance over aesthetics and there will already be quite a few visible LEDs. I can do without the LEDs in the front but in itself when I said hidden, I said from the inside so they will be visible normally. I just...

Don't the fans always have the same distance to the walls because they are attached to them? So the best configuration would be : Front: 2x 140mm + watercooling radiator in intake Rear: 1x 140mm in exhaust Top: 2x 140mm in exhaust I was saying that the LEDs would be hidden by the radiator if...

Okay, thank you for your answer. Yes, the pressure is not negative but as I want to add two exhaust fans, the pressure will become negative. The PC is not close to the walls and it has a lot of space so I'm not worried about that. Also, why would it be better to put the radiator in front? If...