Recent content by gempor

  1. gempor

    [SOLVED] 3060 GPU - - - - fans spin but no signal ?

    based on your story, it's highly possible that your GPU is defective. I recommend you to just go and claim the warranty
  2. gempor

    Question No signal after installing GPU drivers on Windows 10 ?

    hi guys, so recently my friend having trouble on his PC relating to display. the problems kind of absurd and we had tried so many things. so the problem is after installing gpu driver the display on the monitor suddenly goes off and said no signal BUT it's completely fine when he move/plug the...
  3. gempor

    [SOLVED] BSOD - Stop Code:Critical_structure_corruption CI.dll failed

    6 days since the last BSOD appeared. This is what i've done so far: uninstall gpu driver using DDU and then reinstall it -> different BSOD appeared (fltmgr with system thread exception not handled error) replace ram and use the same ram stick for dual channel -> fltmgr no longer happened...
  4. gempor

    [SOLVED] BSOD - Stop Code:Critical_structure_corruption CI.dll failed

    hynix is the newer one, about memtest86, do I need a bootable drive / flashdisk? i've run windows mem diagnostic and everything came out clean but i'll still do the memtest as you say. Thanks again
  5. gempor

    [SOLVED] BSOD - Stop Code:Critical_structure_corruption CI.dll failed

    new BSOD appeared, this time got different error code for the 1st time since 19th august https://drive.google.com/file/d/1DxkWY43d2ePmda9LJ2fgAt4l7EodfwUG/view?usp=sharing
  6. gempor

    [SOLVED] BSOD - Stop Code:Critical_structure_corruption CI.dll failed

    2 different sticks of ram since may 2022, I'll try remove all the drivers you listed. as for bios, I'll wait until the next BSOD happened (hope it wont happen again though)
  7. gempor

    [SOLVED] BSOD - Stop Code:Critical_structure_corruption CI.dll failed

    https://drive.google.com/file/d/179rlwq8w07uKSZYnD9UThY3zuK-41Pjs/view?usp=sharing
  8. gempor

    [SOLVED] BSOD - Stop Code:Critical_structure_corruption CI.dll failed

    windows power setting always on energy savings since I built this pc from 2020 and I've never experienced any BSOD before 19th august. I'll try DDU 1st, thank you for your suggestions, i'll try to keep this post updated.
  9. gempor

    [SOLVED] BSOD - Stop Code:Critical_structure_corruption CI.dll failed

    Hi guys, I've been experiencing frequent BSOD since 19th august 2022 and up until I wrote this it's already happened 5 times. This BSOD happened so randomly and most of the times were while idling and as for today it happened when my pc was on sleep mode (it wakes just for the bsod) PC specs...