Recent content by giffmetango

after swapped it still bsod, so i searching on google and found one reddit post, which he said it causes by hdmi adaptor in my case that's hdmi to dp adaptor 2nd monitor plugged to hdmi port on gpu 1st monitor plugged to hdmi to DP adaptor - to DP on gpu today the firefox, or whole pc just...

my mobo dont have sleep function, hibernate already disabled pagefile always in C drive which are windows partition Currently i just disabled undervolt and pc still running (24/24) without any bsod from that time i posted, tomorrow i think i should swap RAM slot from 1-2 to 2-4 instead edit...

yes here's model, cpu and ram View: https://imgur.com/a/nPyla85 also i let it idle for awhile, the cpu hit beyond max core once again when i'm playing game, i just set the game into windowed mode, enough space to show CPU Core value in HWMonitor i noticed it suddenly push all core into...

So i bought new nvme g3 plus 1tb, install it into pcie 3 slot, i just using phison to check it nand, after awhile it just dismount itself, bsod, restart and check, it disappeared from bios. I just pull it out, put it pack, and tightly the nvme screw (was 90% tight before) this time it show up...

yeah, normally it should be 4x 16GB but 32GB is same price as 16GB so i pick 32GB instead without knowing it's 4rx4 instead 2rx8 may causes many problems

Mobo : X99 Nuvoton NCT6779 CPU : 2697v3 I can only make the PC boot if remove other 4 Slot ram 1-3 micron, 2-4 hynix not working 1 micron,2-4 hynix not working 1-2 or 2-4 or 3-4 hynix/micron(same brand and rank is working 2RX8 or 4RX4) So i need to find other hynix 4RX4 32x2 to replace micron...

bake multiple times without put it on the ceramic disc instead, the wind keep blowing it, resulting misalign balls and three more places :D waiting for bga and fix those misalign places

update from baking, 1 - it immediately regonized usb, several seconds later, it unmount itself, leads to malfunction usb port warning 2 - look like the nand is misaligned, nand on top, i can see some solder is leaked out which make the nand not balanced anymore 3 - may try to order some liquid...

i think i'm gonna try wrap it in tinfoil and put it into this because drive performance and health is perfectly in 5 years, it only happen at the last time i hibernate it lol

look like controller is <Mod Edit> broken, i tear the ssd apart, and use one probes of multimeter to bridge between each in red circle , it immediately recognized seagate usb sata to usb adaptor but still extremely slow when rescan disk, my hdd sentinel even hang up disk management it...

Lesson learned: I need to schedule mirroring of Windows to 1-2 HDDs. :) I’ve already ordered a screwdriver; let’s see if my luck is still there.. btw today, the computer power supply exploded, causing a power outage on the entire third floor and tripping the circuit breaker. Jump test...

I bought the Samsung one because everyone told me it's a good SSD. (Even though I have an 850 250GB that has been in use for 1,948 days with 144TB written and 55% health, it's still good.) However, the 860 suddenly died, which surprised me. I hibernate it because my motherboard doesn't have a...

One day ago, I woke up my PC from hibernation, and it couldn't detect any boot drive. I thought it messed up the BIOS. After several attempts, it was still the same. The BIOS still detected the Samsung Evo 860 - 500GB, so I plugged it into a SATA-to-USB 3 adapter (tried multiple adapters) to...

ok i just turn off sleep mode after xx not used in power setting

well about 3-5 days ago i just noticed my pc have something not right, it hang the pc, etc.. i thought it was my phone, but not... so i scan surface full with victoria but why hdd sentinel say perfect, damn i may not trusted monitoring hdd anymore it's feel like bad hdd but there's not bad...